top of page

Get a better sense of your project cost and materials.

modern-yard-logo-horizontal-black.webp

For a seven-board Teak panel, this Surface Mount composite fence provides joined horizontal infill. Its nominal 6 × 3.5 ft size sits between the 3 ft and 4 ft horizontal composite fence configurations.

The Surface Mount posts finish 45 inches above the mounting level. The fence height is 43 inches, with a ½-inch gap below.

  • For a seven-board Teak panel, this Surface Mount composite fence provides joined horizontal infill. Its nominal 6 × 3.5 ft size sits between the 3 ft and 4 ft horizontal composite fence configurations.

    The Surface Mount posts finish 45 inches above the mounting level. The fence height is 43 inches, with a ½-inch gap below.

  • Engineering Dimensions

    Nominal size (width × height): 6 × 3.5 ft.

    Mounting Type: Surface Mount.

    Fence height: 43 inches.

    Gap below the fence: ½ inch.

    Post spacing (center to center): 71½ inches.

    Clear opening between posts: approximately 68¼ inches.

    Post height above ground: 45 inches, excluding the post cap.

    Parts and Materials

    Standard Post Cap: powder-coated aluminum.

    74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.

    3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).

    Top Rail: powder-coated aluminum.

    Bottom Rail: powder-coated aluminum.

    Horizontal Connector: aluminum.

    #8 x 3/4" ST Screw: 410 stainless steel.

    Composite Fence Board: wood-plastic composite (WPC).

    Groove Cover: powder-coated aluminum.

    • Seven Teak composite boards form the full-privacy infill above the separate ½-inch lower clearance.
    • Teak's grain pattern gives the closed board area a wood appearance beside Private Black metal posts.
    • Clean the composite infill with mild soap, water and a soft brush or cloth.
    • The steel posts mount on welded base plates, with customer-supplied ground anchors for fastening them.
  • Limited warranty periods (residential / commercial use):

    • Structural defects in Teak boards and covered metal fence parts: up to 25 / 10 years.
    • Covered Teak board color changes: up to 25 / 10 years.
    • Coastal metal coating defects: up to 5 / 3 years.
    • Non-coastal metal coating defects: up to 15 / 10 years.
    • Covered metal finish fading, all locations: up to 8 / 5 years.

    For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.

    Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.

    Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.

    Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.

    For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.

    Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.

    We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.

    Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.

Related Components

Modern Yard 74-inch galvanized steel fence post with welded base plate and compatible system components

Modern Yard™ 74-Inches Steel Post with Welded Base Plate

Modern Yard horizontal fence rail set with matching rail components on a white background

Modern Yard™ Horizontal Fence Rail Set

Modern Yard Teak composite fence board with natural wood-look finish on a white background

Modern Yard™ Teak Fence Board (4-Pack)

Imagine Your Future Fence

Installation Guides

Installation Manual

​Technical Drawing


Frequently Asked Questions

This version uses seven boards instead of six. Its listed fence and post heights are 43 and 45 inches respectively.

No. The ½-inch clearance is below the fence. The seven-board infill is the full-privacy arrangement.

Yes. Buy ground anchors separately for the welded base plates.

bottom of page