Teak is the infill color of this low Surface Mount composite fence; Private Black finishes its steel posts. Six boards form the closed horizontal composite fence layout across a nominal 6 × 3 ft section.
A horizontal rail set holds the boards. Use the 68¼-inch clear opening between posts for layout, rather than the nominal 6 ft width.
Teak is the infill color of this low Surface Mount composite fence; Private Black finishes its steel posts. Six boards form the closed horizontal composite fence layout across a nominal 6 × 3 ft section.
A horizontal rail set holds the boards. Use the 68¼-inch clear opening between posts for layout, rather than the nominal 6 ft width.
Engineering Dimensions
Nominal size (width × height): 6 × 3 ft.
Mounting Type: Surface Mount.
Fence height: 37 inches.
Gap below the fence: ½ inch.
Post spacing (center to center): 71½ inches.
Clear opening between posts: approximately 68¼ inches.
Post height above ground: 39 inches, excluding the post cap.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Top Rail: powder-coated aluminum.
Bottom Rail: powder-coated aluminum.
Horizontal Connector: aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
- Six Teak composite boards form the closed horizontal infill.
- Teak's wood-grain finish has a natural wood look beside Private Black steel posts.
- The composite boards need no regular painting, staining or sealing. Clean them with mild soap, water and a soft brush or cloth.
- The steel posts have welded base plates for Surface Mount. You supply the ground anchors.
- Modern Yard™ 74-inch Steel Post with Welded Base Plate x 1 PC
- Modern Yard™ Teak Fence Board x 1.5 packs (6 boards)
- Modern Yard™ Horizontal Fence Rail Set x 1 set
Limited warranty periods (residential / commercial use):
- Structural defects in Teak boards and covered metal fence parts: up to 25 / 10 years.
- Covered Teak board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
What gives this Teak panel its full-privacy layout?
Six boards form the infill without the 1-inch gaps used in the semi-privacy version.
Is the 6 ft dimension the space between the posts?
No. Six feet is the nominal section width. The specified clear opening is 68¼ inches, and the post center spacing is 71½ inches.
Do I need to supply ground anchors?
You supply the ground anchors for fastening the welded base plates.
You Might Also Like
Surface Mount
Style #: WPH/FPTK7-72X42-SM
Surface Mount
Style #: WPH/FPTK8-72X48-SM
Surface Mount
Style #: WPH/G10TK5-72X36-SM
Surface Mount
Style #: WPH/DP16P01TK5DP1-72X42-SM





















