Explore Our Metal Fence Systems
Choose the horizontal LINE pattern or a vertical corrugated profile, with the corresponding supports and gate options.
Which Metal Fence Style Fits Your Yard?
Start with direction and screening. The difference is visible in the infill and carried through its supporting connections.
LINE Horizontal Steel
LINE slats form repeated horizontal rows. Choose full privacy or a semi-privacy layout with the matching hardware. This route suits a design that follows the width of the yard and needs a choice between solid screening and visible spaces.
Corrugated Metal Fence
Interlocking corrugated steel panels form a continuous privacy surface with vertical ridges. Choose this route when the panel pattern is part of the design. The supported system uses matching posts, rails, and connectors, rather than loose metal sheets alone.
Use actual component dimensions when moving from a design preference to a section layout.
Compare the Details Behind Each Profile
LINE Slat Dimensions
The LINE slat has a listed 1-by-4-inch profile and 94-1/2-inch length. Use its system drawing for cuts, end caps and post spacing; the nominal eight-foot product name does not define those dimensions.
Corrugated Panel Length
The standard corrugated panel is 69-1/2 inches long. That dimension describes the infill, not the complete installed fence height. Posts, rails, clearance, and the selected section details define the assembled layout.
Galvanized Steel and Coated Finish
The steel infill uses galvanized metal and a powder-coated finish. Current products are Private Black. Coatings help protect the surface, but cleaning, cut edges, scratches, and site exposure still require attention.
Panels, Slats, and Complete Systems
A panel pack, slat pack, and assembled fence section contain different things. Use the system drawing for supports and quantities, then check the product listing for package contents. Our metal panel page handles the individual infill sizes and packs. This total-system comparison helps you choose the route before building that order.
Make Three Choices Before Ordering
Bring the preferred profile together with the screening and entry needs on your property.
Privacy Level
Choose continuous screening for private seating or a shared boundary. For views between steel rows, use LINE's supported semi-privacy layout and its own hardware.
Mounting Surface
Show soil, existing concrete, corners, and changes in level. Select the relevant post and foundation details instead of treating every surface as the same installation.
Matching Entrance
Choose a horizontal pre-assembled gate or a Corrugated Metal Gate frame-and-infill setup. Check gate height, usable opening, and support requirements separately from the fence run.
Review the Supporting System and Product Evidence
Shared material names do not make every part or performance claim interchangeable. Use the details for the selected assembly.