top of page

Get a better sense of your project cost and materials.

modern-yard-logo-horizontal-black.webp

A ten-board Teak stack gives this Surface Mount composite fence its full-privacy face. The nominal 6 × 5 ft horizontal composite fence keeps the composite infill separate from the metal post and rail products.

This Surface Mount version is listed with a 61-inch fence height and 63-inch finished post height. Refer to the horizontal composite collection to compare its other sizes.

  • A ten-board Teak stack gives this Surface Mount composite fence its full-privacy face. The nominal 6 × 5 ft horizontal composite fence keeps the composite infill separate from the metal post and rail products.

    This Surface Mount version is listed with a 61-inch fence height and 63-inch finished post height. Refer to the horizontal composite collection to compare its other sizes.

  • Engineering Dimensions

    Nominal size (width × height): 6 × 5 ft.

    Mounting Type: Surface Mount.

    Fence height: 61 inches.

    Gap below the fence: ½ inch.

    Post spacing (center to center): 71½ inches.

    Clear opening between posts: approximately 68¼ inches.

    Post height above ground: 63 inches, excluding the post cap.

    Parts and Materials

    Standard Post Cap: powder-coated aluminum.

    74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.

    3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).

    Top Rail: powder-coated aluminum.

    Bottom Rail: powder-coated aluminum.

    Horizontal Connector: aluminum.

    #8 x 3/4" ST Screw: 410 stainless steel.

    Composite Fence Board: wood-plastic composite (WPC).

    Groove Cover: powder-coated aluminum.

    • Ten joined Teak boards create the full-privacy infill of this nominal 5 ft fence.
    • The boards provide Teak's wood-grain look throughout the horizontal face, framed in Private Black metal.
    • The composite board surfaces need no regular painting, staining or sealing for their routine upkeep.
    • You supply the ground anchors for the steel posts' welded Surface Mount plates.
  • Limited warranty periods (residential / commercial use):

    • Structural defects in Teak boards and covered metal fence parts: up to 25 / 10 years.
    • Covered Teak board color changes: up to 25 / 10 years.
    • Coastal metal coating defects: up to 5 / 3 years.
    • Non-coastal metal coating defects: up to 15 / 10 years.
    • Covered metal finish fading, all locations: up to 8 / 5 years.

    For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.

    Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.

    Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.

    Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.

    For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.

    Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.

    We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.

    Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.

Related Components

Modern Yard 74-inch galvanized steel fence post with welded base plate and compatible system components

Modern Yard™ 74-Inches Steel Post with Welded Base Plate

Modern Yard horizontal fence rail set with matching rail components on a white background

Modern Yard™ Horizontal Fence Rail Set

Modern Yard Teak composite fence board with natural wood-look finish on a white background

Modern Yard™ Teak Fence Board (4-Pack)

Imagine Your Future Fence

Installation Guides

Installation Manual

​Technical Drawing


Frequently Asked Questions

No. Assemble ten separate Teak boards between the top and bottom rails.

No. The nominal fence height is 5 ft, while the listed fence and post heights are 61 and 63 inches.

You supply the ground anchors; they are not included.

bottom of page