Eight Teak boards form a consistent wood-look face on this Surface Mount composite fence. Its horizontal composite fence arrangement pairs closed infill with Private Black steel posts at a nominal 6 × 4 ft size.
One horizontal rail set serves this Surface Mount panel. The specified 68¼-inch clear opening is smaller than the nominal section width, an important distinction when positioning the posts.
Eight Teak boards form a consistent wood-look face on this Surface Mount composite fence. Its horizontal composite fence arrangement pairs closed infill with Private Black steel posts at a nominal 6 × 4 ft size.
One horizontal rail set serves this Surface Mount panel. The specified 68¼-inch clear opening is smaller than the nominal section width, an important distinction when positioning the posts.
Engineering Dimensions
Nominal size (width × height): 6 × 4 ft.
Mounting Type: Surface Mount.
Fence height: 49 inches.
Gap below the fence: ½ inch.
Post spacing (center to center): 71½ inches.
Clear opening between posts: approximately 68¼ inches.
Post height above ground: 51 inches, excluding the post cap.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Top Rail: powder-coated aluminum.
Bottom Rail: powder-coated aluminum.
Horizontal Connector: aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
- Eight Teak boards join together as the closed infill of this nominal 4 ft panel.
- The Teak wood-look faces sit between Private Black framing, keeping the board color separate from the metal finish.
- For ordinary composite-board cleaning, use gentle soap and water along with a soft cloth or brush.
- The steel posts have welded base plates for Surface Mount. You supply the ground anchors.
- Modern Yard™ 74-inch Steel Post with Welded Base Plate x 1 PC
- Modern Yard™ Teak Fence Board x 2 packs (8 boards)
- Modern Yard™ Horizontal Fence Rail Set x 1 set
Limited warranty periods (residential / commercial use):
- Structural defects in Teak boards and covered metal fence parts: up to 25 / 10 years.
- Covered Teak board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
Is Teak the color of the entire post-and-board assembly?
Teak identifies the eight composite boards. The metal post system is Private Black.
How high are the base-mounted posts after preparation?
The finished post height is 51 inches. The 74-inch name refers to the stock welded-base post product.
Are the fasteners for the mounting surface supplied?
You supply ground anchors separately from the rail connections.
You Might Also Like
Surface Mount
Style #: WPH/FPTK7-72X42-SM
Surface Mount
Style #: WPH/FPTK6-72X36-SM
Surface Mount
Style #: WPH/DP16P01TK5DP1-72X42-SM




















