This Surface Mount composite fence pairs sixteen upright Teak pieces with two Private Black LINE top slats. The complete vertical composite fencing section is nominally 8 × 4 ft.
These composite fence boards have a wood grain texture and wood-plastic core. They resist moisture, insects, rot and fading. No routine painting, staining or sealing is needed.
Steel rails hold the lower boards; LINE hardware supports the open top. Cut the welded-base steel posts from the top, keeping each base plate and its holes intact.
This Surface Mount composite fence pairs sixteen upright Teak pieces with two Private Black LINE top slats. The complete vertical composite fencing section is nominally 8 × 4 ft.
These composite fence boards have a wood grain texture and wood-plastic core. They resist moisture, insects, rot and fading. No routine painting, staining or sealing is needed.
Steel rails hold the lower boards; LINE hardware supports the open top. Cut the welded-base steel posts from the top, keeping each base plate and its holes intact.
Engineering Dimensions
Nominal size (width × height): 8 × 4 ft.
Mounting Type: Surface Mount.
Fence height: 48 inches.
Gap below the fence: ½ inch.
Post spacing (center to center): 96⅜ inches.
Clear opening between posts: approximately 93¼ inches.
Post height above ground: 50 inches, excluding the post cap.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
U Rail: powder-coated galvanized steel.
End Cap: PA6.
Top Rail Connector: powder-coated aluminum.
Bottom Rail Connector: powder-coated aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Line™ Fence Slat: powder-coated galvanized steel.
Base Connector: powder-coated aluminum.
Stackable Connector: powder-coated aluminum.
L Connector: 201 stainless steel.
- Sixteen upright Teak pieces form the lower face of this composite fence panel.
- The two Private Black LINE slats leave open spaces in the upper section.
- Teak wood-grain composite needs no routine paint, stain or sealer.
- Steel posts with welded plates connect this layout at the mounting surface.
- Modern Yard™ 74-inch Steel Post with Welded Base Plate x 1 PC
- Modern Yard™ Teak Fence Board x 2 packs (8 full-length boards; 16 installed pieces after cutting)
- Modern Yard™ Vertical Fence Rail Set x 1 set
- Modern Yard Line™ Fence Slat x 1 pack (2 slats)
- Modern Yard™ Semi-Privacy Hardware Kit for 1-Inch Fence Slats x 0.2 set (Base Connector x 6 PCs, Stackable Connector x 2 PCs, L Connector x 2 PCs)
Limited warranty periods (residential / commercial use):
- Structural defects in Teak boards and covered metal fence parts: up to 25 / 10 years.
- Covered Teak board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
How many board and LINE packs does one panel use?
Two Teak packs provide eight originals for sixteen short pieces. One LINE pack supplies the two top slats.
Which connectors hold the top slats?
Use six Base Connectors, two Stackable Connectors and two L Connectors. The board body uses separate vertical rails.
Are the welded bases and ground anchors the same purchase?
Welded base plates come with the steel posts. Supply anchors separately for every post location, including shared posts and free ends.
You Might Also Like
In-Ground
Style #: WPV/STTK16LNPB2-96X84-IG
Surface Mount
Style #: WPV/FPTK16-96X36-SM
Surface Mount
Style #: WPH/DP16P01TK5DP1-72X42-SM






















