A Private Black P01 panel accompanies ten Teak boards in this Surface Mount composite fence. The horizontal composite fence has a nominal 6 × 6 ft section, with the decorative kit and board infill listed as separate products.
The Surface Mount version uses welded-base posts finished at 74 inches, framing a listed 72-inch fence height. Its decorative panel and rails are separate from the ten-board Teak quantity.
A Private Black P01 panel accompanies ten Teak boards in this Surface Mount composite fence. The horizontal composite fence has a nominal 6 × 6 ft section, with the decorative kit and board infill listed as separate products.
The Surface Mount version uses welded-base posts finished at 74 inches, framing a listed 72-inch fence height. Its decorative panel and rails are separate from the ten-board Teak quantity.
Engineering Dimensions
Nominal size (width × height): 6 × 6 ft.
Mounting Type: Surface Mount.
Fence height: 72 inches.
Gap below the fence: ½ inch.
Post spacing (center to center): 71½ inches.
Clear opening between posts: approximately 68¼ inches.
Post height above ground: 74 inches, excluding the post cap.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Top Rail: powder-coated aluminum.
Bottom Rail: powder-coated aluminum.
Horizontal Connector: aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
Decorative Panel: electrocoated and powder-coated galvanized steel.
Decorative Panel Top Rail: powder-coated aluminum.
Decorative Panel Bottom Rail: powder-coated aluminum.
Decorative Panel Side Rail: powder-coated aluminum.
- The decorative fence combines 10 Teak boards with one Private Black insert in Pattern P01.
- Wood-grain Teak faces distinguish the composite board area from the patterned metal insert.
- The Teak composite board finish requires no regular painting, staining or sealing.
- You provide the ground anchors for the steel posts' welded base plates.
- Modern Yard™ 74-inch Steel Post with Welded Base Plate x 1 PC
- Modern Yard™ Teak Fence Board x 2.5 packs (10 boards)
- Modern Yard™ 1 Foot x 6 Feet Fence Decorative Panel x 1 set
- Modern Yard™ Horizontal Fence Rail Set x 1 set
Limited warranty periods (residential / commercial use):
- Structural defects in Teak boards and covered metal fence parts: up to 25 / 10 years.
- Covered Teak board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
Which Teak components make up the decorative infill?
Ten Teak boards are installed with one 1 × 6 ft Pattern P01 decorative panel.
Can I select a different pattern under this configuration?
Only Pattern P01 is available for this configuration.
What is required for the Teak panel’s base-to-ground fixing?
Supply ground anchors for the welded base plates separately from the Teak fence components.
You Might Also Like
In-Ground
Style #: WPH/DP16P01TK12DP1-72X84-IG
Surface Mount
Style #: WPH/DP16P01TK5DP1-72X42-SM
Surface Mount
Style #: WPH/FPTK12-72X72-SM
Surface Mount
Style #: WPH/G10TK10-72X72-SM
Surface Mount
Style #: WPH/SPTK9-72X72-SM
In-Ground
Style #: WPV/STTK16LNPB2-96X84-IG























