Eight Teak composite fence boards create the open rows of this Surface Mount composite fence. A single aluminum rail pair supports the nominal 6 × 5 ft semi privacy fence, with 1-inch gaps between boards.
Wood plastic composite blends wood fibers and recycled plastic beneath the wood-grain faces. Private Black galvanized steel posts have welded base plates for the fence system. You supply the ground anchors.
Eight Teak composite fence boards create the open rows of this Surface Mount composite fence. A single aluminum rail pair supports the nominal 6 × 5 ft semi privacy fence, with 1-inch gaps between boards.
Wood plastic composite blends wood fibers and recycled plastic beneath the wood-grain faces. Private Black galvanized steel posts have welded base plates for the fence system. You supply the ground anchors.
Engineering Dimensions
Nominal size (width × height): 6 × 5 ft.
Mounting Type: Surface Mount.
Fence height: 60 inches.
Gap below the fence: 2 inches.
Post spacing (center to center): 71½ inches.
Clear opening between posts: approximately 68¼ inches.
Post height above ground: 62 inches, excluding the post cap.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Top Rail: powder-coated aluminum.
Bottom Rail: powder-coated aluminum.
Horizontal Connector: aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
1-inch Composite Spacer: powder-coated aluminum.
1-inch Groove Cover: powder-coated aluminum.
- Eight Teak boards and 1-inch intervals form the semi-privacy pattern.
- The wood-grain infill uses a wood plastic composite core.
- Routine board care requires no painting, sealing or staining.
- Welded steel base plates provide the Surface Mount post connection.
- Modern Yard™ 74-inch Steel Post with Welded Base Plate x 1 PC
- Modern Yard™ Accessory – 1-Inch Spacer for Horizontal Fence (40-Pack) x 0.35 pack (1-inch Groove Cover x 14 PCs, 1-inch Composite Spacer x 14 PCs)
- Modern Yard™ Teak Fence Board x 2 packs (8 boards)
- Modern Yard™ Horizontal Fence Rail Set x 1 set
Limited warranty periods (residential / commercial use):
- Structural defects in Teak boards and covered metal fence parts: up to 25 / 10 years.
- Covered Teak board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
How can I clean the Teak board faces?
Mild soap and water with a soft brush or cloth suit routine board cleaning. Regular staining, sealing and painting are unnecessary for the composite infill.
How many spacers and groove covers does this panel need?
Allow fourteen spacers and fourteen 1-inch Groove Covers. Seven board-to-board gaps each need these parts at both ends of the infill.
Do I need to buy anchors for the base plates?
Yes. You provide the ground anchors for the welded-base steel posts. They are separate from the Teak boards, rail set and spacing parts.
You Might Also Like
Surface Mount
Style #: WPH/G10TK10-72X72-SM
Surface Mount
Style #: WPH/G10TK5-72X36-SM
Surface Mount
Style #: WPH/FPTK10-72X60-SM
Surface Mount
Style #: WPH/DP16P01TK10DP1-72X72-SM
Surface Mount
Style #: WPH/SPTK9-72X72-SM
Surface Mount
Style #: WPV/STTK16LNPB2-96X48-SM























