top of page

Get a better sense of your project cost and materials.

modern-yard-logo-horizontal-black.webp

Private Black LINE Horizontal Full Privacy Metal Fence Panel — 8 ft W × 5 ft H - Surface Mount

Style #:

LNH/FPPB15-96X60-SM

Fifteen Private Black LINE slats give this Surface Mount metal fence a closed horizontal face. The nominal 8 × 5 ft horizontal metal fence uses the Full-Privacy Hardware Kit for 1-Inch Fence Slats.

The Surface Mount configuration lists a 60-inch fence height and 62-inch finished posts. A 1-inch gap is retained below the fence; the full-privacy designation describes the slats above it.

  • Fifteen Private Black LINE slats give this Surface Mount metal fence a closed horizontal face. The nominal 8 × 5 ft horizontal metal fence uses the Full-Privacy Hardware Kit for 1-Inch Fence Slats.

    The Surface Mount configuration lists a 60-inch fence height and 62-inch finished posts. A 1-inch gap is retained below the fence; the full-privacy designation describes the slats above it.

  • Engineering Dimensions

    Nominal size (width × height): 8 × 5 ft.

    Mounting Type: Surface Mount.

    Fence height: 60 inches.

    Gap below the fence: 1 inch.

    Post spacing (center to center): 96⅜ inches.

    Clear opening between posts: approximately 93¼ inches.

    Post height above ground: 62 inches, excluding the post cap.

    Parts and Materials

    Standard Post Cap: powder-coated aluminum.

    74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.

    3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).

    Line™ Fence Slat: powder-coated galvanized steel.

    Base Connector: powder-coated aluminum.

    L Connector: 201 stainless steel.

    #8 x 3/4" ST Screw: 410 stainless steel.

    Groove Cover: powder-coated aluminum.

    Slot Insert Strip: EVA (ethylene vinyl acetate).

    • Fifteen LINE steel slats form the closed horizontal face of this nominal 5 ft fence.
    • The Private Black finish is powder coating over galvanized-steel infill, with matching metal posts.
    • The steel posts have welded base plates for Surface Mount.
    • You provide ground anchors separately from the full-privacy slat hardware.
  • Limited warranty periods (residential / commercial use):

    • Structural defects in covered metal fence parts: up to 25 / 10 years.
    • Coastal metal coating defects: up to 5 / 3 years.
    • Non-coastal metal coating defects: up to 15 / 10 years.
    • Covered metal finish fading, all locations: up to 8 / 5 years.

    For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.

    Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.

    Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.

    Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.

    For approved claims, Modern Yard refunds or replaces defective parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.

    Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.

    We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.

    Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.

Related Components

Modern Yard 74-inch galvanized steel fence post with welded base plate and compatible system components

Modern Yard™ 74-Inches Steel Post with Welded Base Plate

Modern Yard LINE 1 x 4 x 8 ft galvanized steel fence slat with dark powder-coated finish

Modern Yard Line™ Fence Slat - 1 in. x 4 in. x 8 ft (2-Pack)

Modern Yard full-privacy hardware kit for 1-inch horizontal fence slats

Modern Yard™ Full-Privacy Hardware Kit for 1-Inch Fence Slats

Imagine Your Future Fence

Installation Guides

Installation Manual

​Technical Drawing


Frequently Asked Questions

One pack is specified for this height, together with fifteen installed LINE slats.

No. The engineering record lists a 1-inch clearance below this 60-inch fence assembly.

No. You supply ground anchors for the welded posts; the full-privacy kit provides infill hardware.

bottom of page