top of page

Get a better sense of your project cost and materials.

modern-yard-logo-horizontal-black.webp

Teak Composite Horizontal Spaced Panels Fence Panel — 6 ft W × 6 ft H - Surface Mount

Style #:

WPH/SPTK9-72X72-SM

Nine Teak boards form four framed groups in this Surface Mount composite fence. The nominal 6 × 6 ft semi privacy fence leaves approximately 4¼ inches between groups. Each group has its own aluminum top and bottom rails.

The composite fence boards have a wood grain texture and a wood plastic composite core of wood fibers and recycled plastic. Teak surfaces resist moisture, insects, rot and fading. No regular painting, staining or sealing is needed for the board faces. Private Black steel posts with welded base plates complete this composite fencing section.

  • Nine Teak boards form four framed groups in this Surface Mount composite fence. The nominal 6 × 6 ft semi privacy fence leaves approximately 4¼ inches between groups. Each group has its own aluminum top and bottom rails.

    The composite fence boards have a wood grain texture and a wood plastic composite core of wood fibers and recycled plastic. Teak surfaces resist moisture, insects, rot and fading. No regular painting, staining or sealing is needed for the board faces. Private Black steel posts with welded base plates complete this composite fencing section.

  • Engineering Dimensions

    Nominal size (width × height): 6 × 6 ft.

    Mounting Type: Surface Mount.

    Fence height: 72 inches.

    Gap below the fence: ½ inch.

    Post spacing (center to center): 71½ inches.

    Clear opening between posts: approximately 68¼ inches.

    Post height above ground: 74 inches, excluding the post cap.

    Parts and Materials

    Standard Post Cap: powder-coated aluminum.

    74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.

    3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).

    Top Rail: powder-coated aluminum.

    Bottom Rail: powder-coated aluminum.

    Horizontal Connector: aluminum.

    #8 x 3/4" ST Screw: 410 stainless steel.

    Composite Fence Board: wood-plastic composite (WPC).

    Groove Cover: powder-coated aluminum.

    • Four separately framed groups divide the nine Teak composite boards.
    • Approximately 4¼-inch openings separate the groups in this six-foot-high fence panel.
    • Teak wood-grain faces resist moisture and fading without routine paint, stain or sealer.
    • Welded steel post bases provide the surface connection, using customer-supplied anchors.
  • Limited warranty periods (residential / commercial use):

    • Structural defects in Teak boards and covered metal fence parts: up to 25 / 10 years.
    • Covered Teak board color changes: up to 25 / 10 years.
    • Coastal metal coating defects: up to 5 / 3 years.
    • Non-coastal metal coating defects: up to 15 / 10 years.
    • Covered metal finish fading, all locations: up to 8 / 5 years.

    For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.

    Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.

    Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.

    Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.

    For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.

    Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.

    We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.

    Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.

Related Components

Modern Yard 74-inch galvanized steel fence post with welded base plate and compatible system components

Modern Yard™ 74-Inches Steel Post with Welded Base Plate

Modern Yard horizontal fence rail set with matching rail components on a white background

Modern Yard™ Horizontal Fence Rail Set

Modern Yard Teak composite fence board with natural wood-look finish on a white background

Modern Yard™ Teak Fence Board (4-Pack)

Imagine Your Future Fence

Installation Guides

Installation Manual

​Technical Drawing


Frequently Asked Questions

One top-and-bottom rail pair frames each of the four board groups. The open breaks sit between those groups. This layout uses no one-inch board spacers.

Nine boards use 2.25 four-board packs of material. For one isolated section, three whole packs supply twelve boards and leave three unused. Combine your requirements before rounding the full project order.

Supply anchors separately for the welded post bases. The rail sets frame the composite boards; their quantities do not specify the ground anchor model.

bottom of page