This Redwood composite fence gate uses four one-inch view openings within its horizontal infill. Five full board pieces and a solid terminal strip sit inside a welded aluminum frame. The single leaf is nominally 3.5 ft wide and 3.5 ft high.
Eight aluminum side-groove spacers establish the four gaps, with two spacers per opening. The solid strip finishes the stack without creating a fifth view gap. Galvanized steel posts support the gate, while the Redwood composite faces resist moisture, insects, rot and fading.
The board surfaces need no regular painting, staining or sealing. Clean them with mild soap, water and a soft brush or cloth. See the composite fence gate options for other board directions and leaf formats.
This Redwood composite fence gate uses four one-inch view openings within its horizontal infill. Five full board pieces and a solid terminal strip sit inside a welded aluminum frame. The single leaf is nominally 3.5 ft wide and 3.5 ft high.
Eight aluminum side-groove spacers establish the four gaps, with two spacers per opening. The solid strip finishes the stack without creating a fifth view gap. Galvanized steel posts support the gate, while the Redwood composite faces resist moisture, insects, rot and fading.
The board surfaces need no regular painting, staining or sealing. Clean them with mild soap, water and a soft brush or cloth. See the composite fence gate options for other board directions and leaf formats.
Engineering Dimensions
Nominal size (width × height): 3.5 × 3.5 ft.
Mounting Type: In-Ground.
Gate height: 43¼ inches.
Gap below the gate: 1½ inches.
Post spacing (center to center): 45⅝ inches.
Clear opening between posts: approximately 42⅜ inches.
Post height above ground: 45 inches, excluding the post cap.
Post depth below ground: 24 inches.
Concrete footing width: 12 inches min.
Hinge positions: 8 / 8 inches.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
42 x 42-inch Welded Gate Frame: powder-coated aluminum.
Gate Frame Cover Strip: powder-coated aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
#8 x 1-1/4" ST Screw: 410 stainless steel.
#10 x 1" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Gate Stopper: powder-coated aluminum.
Gate Stop Cover Plate: powder-coated aluminum.
Hinge: powder-coated aluminum.
Groove Cover: powder-coated aluminum.
1-inch Composite Spacer: powder-coated aluminum.
- Five Redwood board pieces and one solid end strip create the horizontal infill.
- Four one-inch openings define the semi-privacy pattern.
- Eight aluminum spacers set the gaps within the welded aluminum frame.
- Redwood wood-grain composite resists moisture, insects, rot and fading.
- Modern Yard™ 98-inch Steel Post x 2 PCs
- Modern Yard™ 42-inch x 42-inch Door Frame x 1 set
- Modern Yard™ Redwood Fence Board x 1.5 packs (6 boards)
- Modern Yard™ Accessory – 1-Inch Spacer for Horizontal Fence (40-Pack) x 0.2 pack
Limited warranty periods (residential / commercial use):
- Structural defects in Redwood boards and covered metal gate parts: up to 25 / 10 years.
- Covered Redwood board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently asked questions
Does the solid terminal strip add another opening?
The strip closes the end of the infill stack. Four one-inch gaps separate the five full board pieces. It does not create a fifth opening or change the specified spacer count.
Which parts differ from the closed Redwood gate?
The small Redwood full-privacy gate uses six joined pieces. This semi-privacy layout needs five full pieces, a solid terminal strip and eight spacers for its four gaps. Select the board and spacer requirements for the chosen pattern.
How do I order it with the surrounding fence system?
Include this Redwood semi-privacy leaf and adjacent fence sections in the component quote. The spacer product is separate from the gate frame. The combined order can total board stock and count shared gate posts once.
You Might Also Like
In-Ground
Without Crossbeam
Style #: WPH/SGG10RD10-42X72-IG
In-Ground
With Crossbeam
Style #: WPH/SGG10RD10-42X72-CB-IG
In-Ground
Without Crossbeam
Style #: WPH/SGFPRD6-42X42-IG
In-Ground
Without Crossbeam
Style #: WPH/SGDP16P01RD9DP1-42X72-IG
In-Ground
With Crossbeam
Style #: WPH/SGFPRD11-42X72-CB-IG
In-Ground
With Crossbeam
Style #: WPH/SGDP16P01RD9DP1-42X72-CB-IG