Eleven horizontal Redwood boards form the closed infill of this composite fence gate. The nominal 3.5 × 6 ft leaf uses a powder-coated aluminum frame, with a mechanical combination lock listed separately in the component plan. Select the crossbeam version for the specified connection to a 7 ft fence.
Above the leaf, one cut LINE member bridges the posts. That stock and its fixing hardware are purchased separately from the frame; they are not an extra row of composite boards. The horizontal composite fence overview helps compare the fixed sections beside the entrance. When comparing composite fence gates, select this model's two-post layout and materials list, including eleven boards and one crossbeam.
Eleven horizontal Redwood boards form the closed infill of this composite fence gate. The nominal 3.5 × 6 ft leaf uses a powder-coated aluminum frame, with a mechanical combination lock listed separately in the component plan. Select the crossbeam version for the specified connection to a 7 ft fence.
Above the leaf, one cut LINE member bridges the posts. That stock and its fixing hardware are purchased separately from the frame; they are not an extra row of composite boards. The horizontal composite fence overview helps compare the fixed sections beside the entrance. When comparing composite fence gates, select this model's two-post layout and materials list, including eleven boards and one crossbeam.
Engineering Dimensions
Nominal size (width × height): 3.5 × 6 ft.
Mounting Type: In-Ground.
Gate height: 72 inches.
Gap below the gate: 1 inch.
Post spacing (center to center): 45⅝ inches.
Clear opening between posts: approximately 42½ inches.
Post height above ground: 86 inches, excluding the post cap.
Crossbeam top: 2 inches below the post top.
Post depth below ground: 28 inches.
Concrete footing width: 12 inches min.
Hinge positions: 8 / 28½ / 8 inches.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
114-inch Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
71 x 42-inch Welded Gate Frame: powder-coated aluminum.
Gate Frame Cover Strip: powder-coated aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
#8 x 1-1/4" ST Screw: 410 stainless steel.
#10 x 1" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Gate Stopper: powder-coated aluminum.
Gate Stop Cover Plate: powder-coated aluminum.
Hinge: powder-coated aluminum.
Groove Cover: powder-coated aluminum.
Crossbeam: powder-coated galvanized steel.
Base Connector: powder-coated aluminum.
L Connector: 201 stainless steel.
Mechanical Combination Lock: 304 stainless steel.
- An eleven-board horizontal Redwood leaf keeps the specified full-privacy pattern.
- The gate frame is powder-coated aluminum, while the crossbeam is coated galvanized steel.
- The overhead connection is for the selected 7 ft fence layout.
- Frame, board stock, lock, LINE stock and fixing kit remain distinct component entries.
- Modern Yard™ 114-inch Steel Post x 2 PCs
- Modern Yard™ 71-inch x 42-inch Door Frame x 1 set
- Modern Yard™ Redwood Fence Board x 2.75 packs (11 boards)
- Modern Yard™ Stainless Steel Mechanical Combination Lock x 1 set
- Modern Yard Line™ Fence Slat x 0.25 pack (1 crossbeam after cutting)
- Modern Yard™ Full-Privacy Hardware Kit for 1-Inch Fence Slats x 0.5 set (Base Connector x 2 PCs, L Connector x 2 PCs, #8 x 3/4" ST Screw x 8 PCs)
Limited warranty periods (residential / commercial use):
- Structural defects in Redwood boards and covered metal gate parts: up to 25 / 10 years.
- Covered Redwood board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes. The combination lock is outside the periods listed above. Contact Modern Yard for the applicable separate warranty terms.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Related Components
Frequently asked questions
When should I select the Redwood gate with crossbeam?
Choose it for the specified 7 ft fence connection. The ordinary no-crossbeam gate remains a separate installation with different post and opening details.
Does this version use the same number of boards as the vertical Redwood gate?
No. This horizontal leaf uses eleven boards. The corresponding vertical full-privacy single gate uses six; use the component list for the orientation selected.
What does the 2.75-pack board quantity mean?
It is the material share for eleven Redwood boards in four-board packs. The final order uses whole sales packs and considers usable project stock.
You Might Also Like
In-Ground
Without Crossbeam
Style #: WPH/SGFPRD11-42X72-IG
In-Ground
Without Crossbeam
Style #: WPH/SGFPRD6-42X42-IG
In-Ground
With Crossbeam
Style #: WPH/SGG10RD10-42X72-CB-IG
In-Ground
With Crossbeam
Style #: WPH/SGDP16P01RD9DP1-42X72-CB-IG
In-Ground
With Crossbeam
Style #: WPV/SGFPRD6-42X72-CB-IG
In-Ground
Without Crossbeam
Style #: WPV/SGFPRD6-42X72-IG




























