Spaced Redwood infill runs across both leaves of this nominal 7 × 6 ft double gate. Eight one-inch clear gaps remain in each half.
The two aluminum frames share two galvanized steel posts. A combination lock serves the active leaf. The inactive side has an outdoor handle set with drop rod. Browse composite fence gate options for frame, post and operating hardware planning.
Spaced Redwood infill runs across both leaves of this nominal 7 × 6 ft double gate. Eight one-inch clear gaps remain in each half.
The two aluminum frames share two galvanized steel posts. A combination lock serves the active leaf. The inactive side has an outdoor handle set with drop rod. Browse composite fence gate options for frame, post and operating hardware planning.
Engineering Dimensions
Nominal size (width × height): 7 × 6 ft.
Mounting Type: In-Ground.
Gate height: 72 inches.
Gap below the gate: 1 inch.
Post spacing (center to center): 87⅜ inches.
Clear opening between posts: approximately 84¼ inches.
Post height above ground: 74 inches, excluding the post cap.
Post depth below ground: 40 inches.
Concrete footing width: 12 inches min.
Hinge positions: 8 / 28½ / 8 inches.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
114-inch Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
71 x 42-inch Welded Gate Frame: powder-coated aluminum.
Gate Frame Cover Strip: powder-coated aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
#8 x 1-1/4" ST Screw: 410 stainless steel.
#10 x 1" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Gate Stopper: powder-coated aluminum.
Gate Stop Cover Plate: powder-coated aluminum.
Hinge: powder-coated aluminum.
Groove Cover: powder-coated aluminum.
Mechanical Combination Lock: 304 stainless steel.
Outdoor Gate Handle Set with Drop Rod: 304 stainless steel.
#8 x 3/4" ST Screw: 316 stainless steel.
1-inch Composite Spacer: powder-coated aluminum.
- Each leaf combines nine full Redwood board pieces with a solid end strip.
- Each infill area has eight clear gaps, each one inch high.
- Thirty-two spacers serve the two sides of the sixteen actual openings.
- Each Redwood board has resistance to moisture, rot and insect-related damage.
- Modern Yard™ 114-inch Steel Post x 2 PCs
- Modern Yard™ 71-inch x 42-inch Door Frame x 2 sets
- Modern Yard™ Redwood Fence Board x 5 packs (20 boards)
- Modern Yard™ Stainless Steel Mechanical Combination Lock x 1 set
- Modern Yard™ Stainless Steel Outdoor Gate Handle Set with Drop Rod x 1 set
- Modern Yard™ Accessory – 1-Inch Spacer for Horizontal Fence (40-Pack) x 0.8 pack
Limited warranty periods (residential / commercial use):
- Structural defects in Redwood boards and covered metal gate parts: up to 25 / 10 years.
- Covered Redwood board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes. The combination lock and outdoor handle set are outside the periods listed above. Contact Modern Yard for the applicable separate warranty terms.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Related Components
Frequently asked questions
Do both leaves use the same spaced board schedule?
Each leaf has nine full Redwood pieces, a solid terminal strip and eight one-inch gaps. Both leaves together use eighteen full pieces and two strips.
How many spacer packs do both leaves need?
One 40-piece pack covers thirty-two installed spacers for the double gate, leaving eight spare.
Is the inactive-leaf handle a second working lock?
The inactive leaf uses the outdoor handle set with drop rod. The active leaf needs the functional combination lock. Keep both in your Redwood double semi-privacy quote.
You Might Also Like
In-Ground
With Crossbeam
Style #: WPH/DGG10RD20-84X72-CB-IG
In-Ground
Without Crossbeam
Style #: WPH/DGFPRD22-84X72-IG
In-Ground
Without Crossbeam
Style #: WPH/DGDP16P01RD18DP2-84X72-IG
In-Ground
With Crossbeam
Style #: WPH/DGFPRD22-84X72-CB-IG
In-Ground
With Crossbeam
Style #: WPH/DGDP16P01RD18DP2-84X72-CB-IG
In-Ground
Without Crossbeam
Style #: WPV/DGFPRD12-84X72-IG




























