This small Charcoal horizontal fence gate has five full board pieces, one solid terminal strip and four 1-inch clear gaps within a welded aluminum frame. Its nominal size is 3.5 ft wide by 3.5 ft high.
Galvanized steel posts support the welded frame. Eight side-groove spacers create the four openings. Order one 40-piece spacer pack with the Charcoal boards and their end-strip material.
The Charcoal board faces need no routine painting, staining or sealing. Clean them with mild soap and water using a soft cloth or brush. Compare composite fence gate designs by board direction and gate format.
This small Charcoal horizontal fence gate has five full board pieces, one solid terminal strip and four 1-inch clear gaps within a welded aluminum frame. Its nominal size is 3.5 ft wide by 3.5 ft high.
Galvanized steel posts support the welded frame. Eight side-groove spacers create the four openings. Order one 40-piece spacer pack with the Charcoal boards and their end-strip material.
The Charcoal board faces need no routine painting, staining or sealing. Clean them with mild soap and water using a soft cloth or brush. Compare composite fence gate designs by board direction and gate format.
Engineering Dimensions
Nominal size (width × height): 3.5 × 3.5 ft.
Mounting Type: In-Ground.
Gate height: 43¼ inches.
Gap below the gate: 1½ inches.
Post spacing (center to center): 45⅝ inches.
Clear opening between posts: approximately 42⅜ inches.
Post height above ground: 45 inches, excluding the post cap.
Post depth below ground: 24 inches.
Concrete footing width: 12 inches min.
Hinge positions: 8 / 8 inches.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
42 x 42-inch Welded Gate Frame: powder-coated aluminum.
Gate Frame Cover Strip: powder-coated aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
#8 x 1-1/4" ST Screw: 410 stainless steel.
#10 x 1" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Gate Stopper: powder-coated aluminum.
Gate Stop Cover Plate: powder-coated aluminum.
Hinge: powder-coated aluminum.
Groove Cover: powder-coated aluminum.
1-inch Composite Spacer: powder-coated aluminum.
- Charcoal composite forms an open horizontal pattern within the frame.
- A solid terminal strip closes the end of the spaced board stack.
- Four clear gaps, each one inch high, divide the horizontal board stack.
- The Charcoal board infill resists moisture, decay and insect damage.
- Modern Yard™ 98-inch Steel Post x 2 PCs
- Modern Yard™ 42-inch x 42-inch Door Frame x 1 set
- Modern Yard™ Charcoal Fence Board x 1.5 packs (6 boards)
- Modern Yard™ Accessory – 1-Inch Spacer for Horizontal Fence (40-Pack) x 0.2 pack
Limited warranty periods (residential / commercial use):
- Structural defects in Charcoal boards and covered metal gate parts: up to 25 / 10 years.
- Covered Charcoal board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently asked questions
What creates the one-inch gaps?
Each of four openings has a spacer in each side groove: eight spacers in all. A solid composite strip finishes the stack.
Are these the same quantities as a Charcoal fence section?
Use the gate-specific list. This small leaf has five full board pieces plus one strip, while fence sections use their own widths, heights and infill schedules.
What information helps match the adjoining fence?
Include the adjoining fence's color, board direction and privacy pattern in your fence-and-gate quote. Add this small Charcoal semi-privacy gate. The quote can combine shared materials across the layout.
You Might Also Like
In-Ground
Without Crossbeam
Style #: WPH/SGG10CH10-42X72-IG
In-Ground
With Crossbeam
Style #: WPH/SGG10CH10-42X72-CB-IG
In-Ground
Without Crossbeam
Style #: WPH/SGFPCH6-42X42-IG
In-Ground
Without Crossbeam
Charcoal Composite Horizontal 1 × 6 ft Decorative Panel, Pattern P01 Single Gate — 3.5 ft W × 6 ft H
Style #: WPH/SGDP16P01CH9DP1-42X72-IG
In-Ground
With Crossbeam
Style #: WPH/SGFPCH11-42X72-CB-IG
In-Ground
With Crossbeam
Style #: WPH/SGDP16P01CH9DP1-42X72-CB-IG