This semi privacy metal fence combines thirteen horizontal slats with half-inch gaps for a partly open view. The nominal 8 × 5 ft fence panel defines outdoor spaces with a Private Black powder coated finish. Its slat design suits a boundary where you want some screening while keeping views between the rows.
The galvanized steel slats are powder coated to help resist corrosion and outdoor wear. Aluminum Base and Stackable Connectors set the half-inch openings, with stainless steel L Connectors at the top. Compare the semi privacy fence layout selection by spacing before choosing the hardware.
Use two Base Connectors, twenty-four Stackable Connectors and two L Connectors for this pattern. Its three-inch ground gap is separate from the openings between rows. The In-Ground drawing lists 62 inches of post above ground and 20 below. Count shared post locations once and add the free ends.
This semi privacy metal fence combines thirteen horizontal slats with half-inch gaps for a partly open view. The nominal 8 × 5 ft fence panel defines outdoor spaces with a Private Black powder coated finish. Its slat design suits a boundary where you want some screening while keeping views between the rows.
The galvanized steel slats are powder coated to help resist corrosion and outdoor wear. Aluminum Base and Stackable Connectors set the half-inch openings, with stainless steel L Connectors at the top. Compare the semi privacy fence layout selection by spacing before choosing the hardware.
Use two Base Connectors, twenty-four Stackable Connectors and two L Connectors for this pattern. Its three-inch ground gap is separate from the openings between rows. The In-Ground drawing lists 62 inches of post above ground and 20 below. Count shared post locations once and add the free ends.
Engineering Dimensions
Nominal size (width × height): 8 × 5 ft.
Mounting Type: In-Ground.
Fence height: 60 inches.
Gap below the fence: 3 inches.
Post spacing (center to center): 96⅜ inches.
Clear opening between posts: approximately 93¼ inches.
Post height above ground: 62 inches, excluding the post cap.
Post depth below ground: 20 inches.
Concrete footing width: 12 inches min.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
98-inch Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Line™ Fence Slat: powder-coated galvanized steel.
Base Connector: powder-coated aluminum.
Stackable Connector: powder-coated aluminum.
L Connector: 201 stainless steel.
#8 x 3/4" ST Screw: 410 stainless steel.
Groove Cover: powder-coated aluminum.
- Thirteen horizontal steel slats leave half-inch spaces between rows.
- Private Black powder coating helps protect the galvanized steel from corrosion.
- Aluminum spacing connectors and stainless steel L Connectors serve the selected pattern.
- The five-foot In-Ground format keeps a separate three-inch ground gap.
- Modern Yard™ 98-inch Steel Post x 1 PC
- Modern Yard Line™ Fence Slat x 6.5 packs (13 slats)
- Modern Yard™ Semi-Privacy Hardware Kit for 1-Inch Fence Slats x 0.4 set (Base Connector x 2 PCs, Stackable Connector x 24 PCs, L Connector x 2 PCs)
Limited warranty periods (residential / commercial use):
- Structural defects in covered metal fence parts: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
Are the slats aluminum or steel?
The LINE fence system uses galvanized steel for its horizontal slats and posts. The spacing hardware is aluminum, with stainless steel L Connectors at the top. This is a steel slat fence; aluminum slats are not part of the selected layout.
How do the pack quantities work for thirteen slats?
For one section, buy seven two-slat packs, use thirteen pieces and keep one spare. Combine slat requirements before rounding a larger order.
Is the three-inch clearance part of the half-inch spacing?
Three inches describes the ground clearance. Half an inch describes the openings between slats. The drawing separately lists a 60-inch fence height.
You Might Also Like
In-Ground
Style #: LNH/G05PB11-96X48-IG
In-Ground
Style #: LNH/G05PB16-96X72-IG
In-Ground
Style #: LNH/FPPB15-96X60-IG
In-Ground
Style #: LNH/G10PB12-96X60-IG
In-Ground
Style #: LNH/FPPB12-96X48-IG
In-Ground
Style #: LNH/G10PB9-96X48-IG