Eight horizontal slats create the open rows of this Private Black horizontal metal fence. Half-inch gaps separate the LINE slats across a nominal 8 ft width. The three-foot fence height gives the section a low profile, with a separate one-inch gap beneath the infill.
The slats and posts are galvanized steel with powder coating. The slat finish helps resist corrosion and outdoor wear, while the straight rows bring clean lines to an outdoor space. Aluminum Base and Stackable Connectors position the steel infill, with stainless steel L Connectors at the top.
Four two-slat packs supply the eight installed slats. Buy the Semi-Privacy Hardware Kit separately and follow this section's connector quantities. The metal fence options help with material selection and comparisons between open and closed fence panels.
The In-Ground supports use split 114-inch post stock, trimmed for the listed height. Each installed post has 38 inches above ground and 12 below. A stock kit supplies one cap; cutting it into two supports requires one additional cap. Calculate shared posts, free ends and kit supplies across the whole run.
Eight horizontal slats create the open rows of this Private Black horizontal metal fence. Half-inch gaps separate the LINE slats across a nominal 8 ft width. The three-foot fence height gives the section a low profile, with a separate one-inch gap beneath the infill.
The slats and posts are galvanized steel with powder coating. The slat finish helps resist corrosion and outdoor wear, while the straight rows bring clean lines to an outdoor space. Aluminum Base and Stackable Connectors position the steel infill, with stainless steel L Connectors at the top.
Four two-slat packs supply the eight installed slats. Buy the Semi-Privacy Hardware Kit separately and follow this section's connector quantities. The metal fence options help with material selection and comparisons between open and closed fence panels.
The In-Ground supports use split 114-inch post stock, trimmed for the listed height. Each installed post has 38 inches above ground and 12 below. A stock kit supplies one cap; cutting it into two supports requires one additional cap. Calculate shared posts, free ends and kit supplies across the whole run.
Engineering Dimensions
Nominal size (width × height): 8 × 3 ft.
Mounting Type: In-Ground.
Fence height: 36 inches.
Gap below the fence: 1 inch.
Post spacing (center to center): 96⅜ inches.
Clear opening between posts: approximately 93¼ inches.
Post height above ground: 38 inches, excluding the post cap.
Post depth below ground: 12 inches.
Concrete footing width: 12 inches min.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
114-inch Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Line™ Fence Slat: powder-coated galvanized steel.
Base Connector: powder-coated aluminum.
Stackable Connector: powder-coated aluminum.
L Connector: 201 stainless steel.
#8 x 3/4" ST Screw: 410 stainless steel.
Groove Cover: powder-coated aluminum.
- Eight steel LINE slats form horizontal rows with half-inch clear openings.
- Private Black powder coating gives the galvanized steel infill a protective finish that helps resist corrosion.
- Aluminum spacing connectors hold the open pattern without a separate horizontal rail set.
- The low panel keeps its one-inch ground gap distinct from the half-inch gaps between slats.
- Modern Yard™ 114-inch Steel Post x 0.5 PC (cut in half)
- Modern Yard Line™ Fence Slat x 4 packs (8 slats)
- Modern Yard™ Semi-Privacy Hardware Kit for 1-Inch Fence Slats x 7/30 set (Base Connector x 2 PCs, Stackable Connector x 14 PCs, L Connector x 2 PCs)
- Modern Yard™ Accessory – Standard Post Cap x 1 PC (extra per 114-inch stock post cut into two)
Limited warranty periods (residential / commercial use):
- Structural defects in covered metal fence parts: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
Where does the half-inch measurement apply?
It is the clear opening between neighboring horizontal slats. The one-inch ground gap sits beneath the lowest slat. The fence height is 36 inches, so these dimensions describe different parts of the same layout.
Do I order four slats or four packs?
Order four LINE packs for the eight-slat infill; each pack contains two slats. The post stock, semi-privacy hardware and extra cap are separate products. Hardware quantities shown in Component Needs describe the installed connectors. Combine requirements across your project before buying complete kits.
Is this an aluminum fence panel?
The LINE slats and supporting posts are galvanized steel. Aluminum forms the Base and Stackable Connectors, while the L Connectors are stainless steel. Match the material list and the semi-privacy hardware to this eight-slat fence design.
You Might Also Like
In-Ground
Private Black LINE Horizontal Semi-Privacy Metal Fence Panel with Half-Inch Gaps — 8 ft W × 3.5 ft H
Style #: LNH/G05PB9-96X42-IG
In-Ground
Style #: LNH/G05PB11-96X48-IG
In-Ground
Style #: LNH/FPPB9-96X36-IG
In-Ground
Style #: LNH/G10PB7-96X36-IG
In-Ground
Style #: LNH/FPPB10-96X42-IG
In-Ground
Style #: LNH/G10PB8-96X42-IG