Eighteen Private Black LINE slats close the infill of this 6 ft Surface Mount metal fence. The horizontal metal fence has a nominal 8 ft width and uses the listed steel slats, posts and full-privacy hardware.
The 74-inch steel posts have welded base plates and retain their listed 74-inch finished height. Fence height is 72 inches, with a 1-inch gap below.
Eighteen Private Black LINE slats close the infill of this 6 ft Surface Mount metal fence. The horizontal metal fence has a nominal 8 ft width and uses the listed steel slats, posts and full-privacy hardware.
The 74-inch steel posts have welded base plates and retain their listed 74-inch finished height. Fence height is 72 inches, with a 1-inch gap below.
Engineering Dimensions
Nominal size (width × height): 8 × 6 ft.
Mounting Type: Surface Mount.
Fence height: 72 inches.
Gap below the fence: 1 inch.
Post spacing (center to center): 96⅜ inches.
Clear opening between posts: approximately 93¼ inches.
Post height above ground: 74 inches, excluding the post cap.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Line™ Fence Slat: powder-coated galvanized steel.
Base Connector: powder-coated aluminum.
L Connector: 201 stainless steel.
#8 x 3/4" ST Screw: 410 stainless steel.
Groove Cover: powder-coated aluminum.
Slot Insert Strip: EVA (ethylene vinyl acetate).
- Eighteen LINE steel slats create the full-privacy face, with joined horizontal infill.
- Powder coating finishes the galvanized-steel slats in Private Black within the matching metal post system.
- Steel posts with welded base plates provide this fence's Surface Mount supports.
- You supply the ground anchors for these bases. The full-privacy hardware serves the slat infill.
- Modern Yard™ 74-inch Steel Post with Welded Base Plate x 1 PC
- Modern Yard Line™ Fence Slat x 9 packs (18 slats)
- Modern Yard™ Full-Privacy Hardware Kit for 1-Inch Fence Slats x 1 set (Base Connector x 2 PCs, L Connector x 2 PCs, Slot Insert Strip x 4 PCs)
Limited warranty periods (residential / commercial use):
- Structural defects in covered metal fence parts: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
What is the slat count for the full-height LINE privacy panel?
Eighteen LINE slats are installed, with one pack of the Full-Privacy Hardware Kit for 1-Inch Fence Slats.
Are eighteen slats also used in the 6 ft half-inch-gap design?
No. The half-inch-gap version uses sixteen slats, while the nominal one-inch-gap version uses fourteen.
Does the full-height LINE hardware kit include the ground anchors?
You supply the ground anchors; the full-privacy kit covers the slat assembly.
You Might Also Like
Surface Mount
Style #: LNH/FPPB15-96X60-SM
In-Ground
Style #: LNH/FPPB21-96X84-IG
Surface Mount
Style #: LNH/G05PB16-96X72-SM
Surface Mount
Style #: LNH/G10PB14-96X72-SM
Surface Mount
Style #: LNH/G05PB13-96X60-SM
Surface Mount
Style #: LNH/G10PB12-96X60-SM






















