Twelve joined steel slats form this horizontal metal privacy fence. The nominal 8 × 4 ft LINE section has Private Black infill and posts, with a closed horizontal face. Its low fence height keeps views open above the top while closing the slat area.
The galvanized steel slats have a powder-coated finish that helps resist corrosion and outdoor wear. Their straight rows give the section clean lines. Compare other horizontal metal fence patterns before selecting the parts for your layout.
Six LINE packs contain the twelve slats required. This four-foot fence uses one full set of the Full-Privacy Hardware Kit for 1-Inch Fence Slats. The installed connection parts include Base Connectors, L Connectors and EVA slot insert strips. Buy the slat packs, hardware and post products separately.
The drawing lists a 48-inch fence height, 50-inch post height and a one-inch ground clearance. The selected 74-inch post product is trimmed at the top to suit this layout. Its welded base plate stays in place. Supply the base anchors separately and count shared post positions and free ends across the fence run.
Twelve joined steel slats form this horizontal metal privacy fence. The nominal 8 × 4 ft LINE section has Private Black infill and posts, with a closed horizontal face. Its low fence height keeps views open above the top while closing the slat area.
The galvanized steel slats have a powder-coated finish that helps resist corrosion and outdoor wear. Their straight rows give the section clean lines. Compare other horizontal metal fence patterns before selecting the parts for your layout.
Six LINE packs contain the twelve slats required. This four-foot fence uses one full set of the Full-Privacy Hardware Kit for 1-Inch Fence Slats. The installed connection parts include Base Connectors, L Connectors and EVA slot insert strips. Buy the slat packs, hardware and post products separately.
The drawing lists a 48-inch fence height, 50-inch post height and a one-inch ground clearance. The selected 74-inch post product is trimmed at the top to suit this layout. Its welded base plate stays in place. Supply the base anchors separately and count shared post positions and free ends across the fence run.
Engineering Dimensions
Nominal size (width × height): 8 × 4 ft.
Mounting Type: Surface Mount.
Fence height: 48 inches.
Gap below the fence: 1 inch.
Post spacing (center to center): 96⅜ inches.
Clear opening between posts: approximately 93¼ inches.
Post height above ground: 50 inches, excluding the post cap.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Line™ Fence Slat: powder-coated galvanized steel.
Base Connector: powder-coated aluminum.
L Connector: 201 stainless steel.
#8 x 3/4" ST Screw: 410 stainless steel.
Groove Cover: powder-coated aluminum.
Slot Insert Strip: EVA (ethylene vinyl acetate).
- Twelve LINE slats form the closed infill of this nominal four-foot fence panel.
- Private Black powder coating helps the galvanized steel slats resist corrosion and outdoor wear.
- One full-privacy hardware set supports this height's closed connection arrangement.
- Welded steel base plates provide the surface connection for the post products.
- Modern Yard™ 74-inch Steel Post with Welded Base Plate x 1 PC
- Modern Yard Line™ Fence Slat x 6 packs (12 slats)
- Modern Yard™ Full-Privacy Hardware Kit for 1-Inch Fence Slats x 1 set (Base Connector x 2 PCs, L Connector x 2 PCs, Slot Insert Strip x 4 PCs)
Limited warranty periods (residential / commercial use):
- Structural defects in covered metal fence parts: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
How do I count the parts for several fence panels?
Allow twelve slats and one full-privacy hardware set per section. Six two-slat packs supply each section's infill. Count shared post locations once, with additional supports at free ends. An isolated bay needs two welded-base posts.
Is a half-set of full-privacy hardware enough for this height?
The listed requirement for this four-foot layout is one full set. Follow its own Component Needs when ordering. The half-set allocation applies to the shorter full-privacy configurations, with whole-project checks for kit contents and insert strip material.
Are the base anchors included with the full-privacy kit?
Ground anchors are your separate purchase for the welded post bases. The kit supplies the slat connection components and EVA slot strips. Its contents do not specify which anchors suit the mounting surface.
You Might Also Like
Surface Mount
Style #: LNH/FPPB10-96X42-SM
Surface Mount
Style #: LNH/FPPB9-96X36-SM
Surface Mount
Style #: LNH/G05PB11-96X48-SM
Surface Mount
Style #: LNH/G10PB9-96X48-SM
Surface Mount
Private Black LINE Horizontal Semi-Privacy Metal Fence Panel with Half-Inch Gaps — 8 ft W × 3.5 ft H
Style #: LNH/G05PB9-96X42-SM
Surface Mount
Style #: LNH/G10PB8-96X42-SM