top of page

Get a better sense of your project cost and materials.

modern-yard-logo-horizontal-black.webp

Charcoal Composite Vertical Full Privacy Double Gate — 7 ft W × 6 ft H - In-Ground

Style #:

WPV/DGFPCH12-84X72-IG

Six upright Charcoal pieces fill each leaf of this composite fence gate. Two welded aluminum frames surround the joined full-privacy faces. The complete double assembly measures a nominal 7 × 6 ft.

Charcoal's wood-plastic composite core blends wood fibers and recycled plastic beneath a UV-protected wrap. Its faces resist fading, moisture, termites and decay without regular painting, staining or sealing. Private Black names the metal finish.

Three four-board packs supply twelve original Charcoal boards, six for each leaf. The nominal seven-foot width covers the complete pair. Two 114-inch steel posts support the ends, with 74 inches above ground without caps and 40 inches below. Order the mechanical combination lock for the active leaf and the outdoor handle set with drop rod for the inactive leaf. Assemble the selected board infill on site.

Compare composite double gates through the single and double composite fence gate layouts when planning the surrounding fence system. This double gate keeps its twelve-board requirement and two end supports.

  • Six upright Charcoal pieces fill each leaf of this composite fence gate. Two welded aluminum frames surround the joined full-privacy faces. The complete double assembly measures a nominal 7 × 6 ft.

    Charcoal's wood-plastic composite core blends wood fibers and recycled plastic beneath a UV-protected wrap. Its faces resist fading, moisture, termites and decay without regular painting, staining or sealing. Private Black names the metal finish.

    Three four-board packs supply twelve original Charcoal boards, six for each leaf. The nominal seven-foot width covers the complete pair. Two 114-inch steel posts support the ends, with 74 inches above ground without caps and 40 inches below. Order the mechanical combination lock for the active leaf and the outdoor handle set with drop rod for the inactive leaf. Assemble the selected board infill on site.

    Compare composite double gates through the single and double composite fence gate layouts when planning the surrounding fence system. This double gate keeps its twelve-board requirement and two end supports.

  • Engineering Dimensions

    Nominal size (width × height): 7 × 6 ft.

    Mounting Type: In-Ground.

    Gate height: 72 inches.

    Gap below the gate: 1 inch.

    Post spacing (center to center): 87⅜ inches.

    Clear opening between posts: approximately 84¼ inches.

    Post height above ground: 74 inches, excluding the post cap.

    Post depth below ground: 40 inches.

    Concrete footing width: 12 inches min.

    Hinge positions: 8 / 28½ / 8 inches.

    Parts and Materials

    Standard Post Cap: powder-coated aluminum.

    114-inch Steel Post: powder-coated galvanized steel.

    3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).

    71 x 42-inch Welded Gate Frame: powder-coated aluminum.

    Gate Frame Cover Strip: powder-coated aluminum.

    #8 x 3/4" ST Screw: 410 stainless steel.

    #8 x 1-1/4" ST Screw: 410 stainless steel.

    #10 x 1" ST Screw: 410 stainless steel.

    Composite Fence Board: wood-plastic composite (WPC).

    Gate Stopper: powder-coated aluminum.

    Gate Stop Cover Plate: powder-coated aluminum.

    Hinge: powder-coated aluminum.

    Groove Cover: powder-coated aluminum.

    Mechanical Combination Lock: 304 stainless steel.

    Outdoor Gate Handle Set with Drop Rod: 304 stainless steel.

    #8 x 3/4" ST Screw: 316 stainless steel.

    • A UV-protected wrap covers the Charcoal wood-plastic composite core.
    • Six upright pieces join into the full-privacy face of each leaf.
    • Two welded aluminum frames connect to the galvanized steel end posts.
    • The separate mechanical combination lock provides entry without keys or batteries.
  • Limited warranty periods (residential / commercial use):

    • Structural defects in Charcoal boards and covered metal gate parts: up to 25 / 10 years.
    • Covered Charcoal board color changes: up to 25 / 10 years.
    • Coastal metal coating defects: up to 5 / 3 years.
    • Non-coastal metal coating defects: up to 15 / 10 years.
    • Covered metal finish fading, all locations: up to 8 / 5 years.

    For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.

    Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes. The combination lock and outdoor handle set are outside the periods listed above. Contact Modern Yard for the applicable separate warranty terms.

    Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.

    Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.

    For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.

    Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.

    We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.

    Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.

Related Components

Modern Yard 114-inch galvanized steel fence post with compatible fence system components

Modern Yard™ 114-Inches Steel Post

Modern Yard Charcoal composite fence board with dark wood-look finish on a white background

Modern Yard™ Charcoal Fence Board (4-Pack)

Modern Yard 71 x 42 aluminum gate frame on a white background

Modern Yard™ 71 Inches x 42 Inches Gate Frame

Modern Yard 304 stainless steel mechanical combination gate lock

Modern Yard™ Stainless Steel Mechanical Combination Lock

Modern Yard stainless steel outdoor gate handle set with drop rod

Modern Yard™ Stainless Steel Outdoor Gate Handle Set with Drop Rod

Imagine Your Future Fence

​Installation Guides

Installation Manual

​Technical Drawing


Frequently asked questions

Twelve pieces stand vertically, six per frame; the horizontal version has a different cutting plan.

Each independent 3.5 × 6 ft vertical Charcoal gate uses two posts and two four-board packs. This double gate takes two posts and three board packs for its twelve boards. Add the adjacent fence layout in a whole-project quote before rounding the final purchases.

These composite board faces need no regular painting, staining or sealing. Clean them with mild soap and water and a soft cloth or brush. Check the care guides for the metalwork and lock.

bottom of page