This composite fence gate uses eleven joined Charcoal pieces per leaf. Two welded aluminum frames form the nominal 7 × 6 ft double assembly.
Charcoal's composite formula blends wood fibers and recycled plastic beneath a UV-protected wrap. The board faces resist fading from sun exposure, moisture, termites and decay. They need no regular painting, staining or sealing.
Buy two galvanized steel end posts and two gate frames separately from the board packs. Add a mechanical combination lock for the active leaf and a handle set with drop rod for the inactive leaf.
Compare the horizontal composite fence gate layouts when choosing the infill. Assemble this closed pattern on site and keep it separate from the stock requirements for spaced gate faces.
This composite fence gate uses eleven joined Charcoal pieces per leaf. Two welded aluminum frames form the nominal 7 × 6 ft double assembly.
Charcoal's composite formula blends wood fibers and recycled plastic beneath a UV-protected wrap. The board faces resist fading from sun exposure, moisture, termites and decay. They need no regular painting, staining or sealing.
Buy two galvanized steel end posts and two gate frames separately from the board packs. Add a mechanical combination lock for the active leaf and a handle set with drop rod for the inactive leaf.
Compare the horizontal composite fence gate layouts when choosing the infill. Assemble this closed pattern on site and keep it separate from the stock requirements for spaced gate faces.
Engineering Dimensions
Nominal size (width × height): 7 × 6 ft.
Mounting Type: In-Ground.
Gate height: 72 inches.
Gap below the gate: 1 inch.
Post spacing (center to center): 87⅜ inches.
Clear opening between posts: approximately 84¼ inches.
Post height above ground: 74 inches, excluding the post cap.
Post depth below ground: 40 inches.
Concrete footing width: 12 inches min.
Hinge positions: 8 / 28½ / 8 inches.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
114-inch Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
71 x 42-inch Welded Gate Frame: powder-coated aluminum.
Gate Frame Cover Strip: powder-coated aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
#8 x 1-1/4" ST Screw: 410 stainless steel.
#10 x 1" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Gate Stopper: powder-coated aluminum.
Gate Stop Cover Plate: powder-coated aluminum.
Hinge: powder-coated aluminum.
Groove Cover: powder-coated aluminum.
Mechanical Combination Lock: 304 stainless steel.
Outdoor Gate Handle Set with Drop Rod: 304 stainless steel.
#8 x 3/4" ST Screw: 316 stainless steel.
- Eleven joined Charcoal pieces fill each leaf in the full-privacy pattern.
- A UV-protected wrap covers the wood-plastic composite core.
- Charcoal surfaces resist fading, moisture, termites and decay.
- The separate mechanical combination lock offers keyless access without batteries or electrical power.
- Modern Yard™ 114-inch Steel Post x 2 PCs
- Modern Yard™ 71-inch x 42-inch Door Frame x 2 sets
- Modern Yard™ Charcoal Fence Board x 5.5 packs (22 boards)
- Modern Yard™ Stainless Steel Mechanical Combination Lock x 1 set
- Modern Yard™ Stainless Steel Outdoor Gate Handle Set with Drop Rod x 1 set
Limited warranty periods (residential / commercial use):
- Structural defects in Charcoal boards and covered metal gate parts: up to 25 / 10 years.
- Covered Charcoal board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes. The combination lock and outdoor handle set are outside the periods listed above. Contact Modern Yard for the applicable separate warranty terms.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently asked questions
Are there one-inch spaces between the board rows?
The joined boards form a closed face. A separate one-inch ground clearance remains below the gate.
Does the second leaf need another pair of gate posts?
Two 114-inch end posts serve both leaves. Retain 74 inches above ground and 40 below at each gate support.
How do I include the lock and handle products in the order?
List the mechanical combination lock for the active leaf and the outdoor handle set with drop rod for the inactive leaf. Add both products to your Charcoal double-gate quote, along with the two frames and Charcoal board requirement.
You Might Also Like
In-Ground
With Crossbeam
Style #: WPH/DGFPCH22-84X72-CB-IG
In-Ground
Without Crossbeam
Style #: WPV/DGFPCH12-84X72-IG
In-Ground
Without Crossbeam
Style #: WPH/DGG10CH20-84X72-IG
In-Ground
Without Crossbeam
Style #: WPH/DGDP16P01CH18DP2-84X72-IG
In-Ground
With Crossbeam
Style #: WPV/DGFPCH12-84X72-CB-IG
In-Ground
With Crossbeam
Style #: WPH/DGG10CH20-84X72-CB-IG



























