This Surface Mount composite fence pairs a Charcoal board body with two Private Black LINE slats above. Its nominal 8 × 4 ft size includes both materials. The upright wood-grain faces give way to open spaces around the steel top.
The composite fence boards blend wood fibers and recycled plastic beneath a UV-protected wrap. Charcoal faces resist moisture, fading, termites and decay. Compare the vertical composite fencing layouts before choosing this mixed-material fence panel.
Welded-base steel posts support the section at the surface. Their listed finished height is 50 inches, around a 48-inch fence. Supply ground anchors separately for the retained bases.
This Surface Mount composite fence pairs a Charcoal board body with two Private Black LINE slats above. Its nominal 8 × 4 ft size includes both materials. The upright wood-grain faces give way to open spaces around the steel top.
The composite fence boards blend wood fibers and recycled plastic beneath a UV-protected wrap. Charcoal faces resist moisture, fading, termites and decay. Compare the vertical composite fencing layouts before choosing this mixed-material fence panel.
Welded-base steel posts support the section at the surface. Their listed finished height is 50 inches, around a 48-inch fence. Supply ground anchors separately for the retained bases.
Engineering Dimensions
Nominal size (width × height): 8 × 4 ft.
Mounting Type: Surface Mount.
Fence height: 48 inches.
Gap below the fence: ½ inch.
Post spacing (center to center): 96⅜ inches.
Clear opening between posts: approximately 93¼ inches.
Post height above ground: 50 inches, excluding the post cap.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
U Rail: powder-coated galvanized steel.
End Cap: PA6.
Top Rail Connector: powder-coated aluminum.
Bottom Rail Connector: powder-coated aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Line™ Fence Slat: powder-coated galvanized steel.
Base Connector: powder-coated aluminum.
Stackable Connector: powder-coated aluminum.
L Connector: 201 stainless steel.
- Sixteen Charcoal pieces create the vertical body beneath two horizontal steel slats.
- Charcoal's wood grain texture contrasts with the open Private Black LINE top.
- Composite board faces need no regular paint, stain or sealer.
- The selected steel posts retain welded plates for Surface Mount.
- Modern Yard™ 74-inch Steel Post with Welded Base Plate x 1 PC
- Modern Yard™ Charcoal Fence Board x 2 packs (8 full-length boards; 16 installed pieces after cutting)
- Modern Yard™ Vertical Fence Rail Set x 1 set
- Modern Yard Line™ Fence Slat x 1 pack (2 slats)
- Modern Yard™ Semi-Privacy Hardware Kit for 1-Inch Fence Slats x 0.2 set (Base Connector x 6 PCs, Stackable Connector x 2 PCs, L Connector x 2 PCs)
Limited warranty periods (residential / commercial use):
- Structural defects in Charcoal boards and covered metal fence parts: up to 25 / 10 years.
- Covered Charcoal board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
What original boards supply the lower body?
Two packs contain eight full-length Charcoal boards. Each yields two short pieces, supplying the sixteen installed positions.
Does the metal top use the composite rail set?
The Vertical Fence Rail Set frames the composite body. Separate LINE hardware supports the top: six Base Connectors, two Stackable Connectors and two L Connectors.
What should I allow for the surface connection?
Use the specified welded-base posts and supply ground anchors separately. An independent panel needs two posts; count shared support locations and free ends for a connected run.
You Might Also Like
In-Ground
Style #: WPV/STCH16LNPB2-96X84-IG
Surface Mount
Style #: WPV/FPCH16-96X36-SM
Surface Mount
Charcoal Composite Horizontal Fence Panel with a 1 × 6 ft Decorative Panel (P01) — 6 ft W × 3.5 ft H
Style #: WPH/DP16P01CH5DP1-72X42-SM
Surface Mount
Style #: WPH/SPCH4-72X42-SM
Surface Mount
Style #: WPH/G10CH5-72X36-SM
























