6x6 Teak Semi-Privacy Composite Fence

FENCE COLLECTIONS

Wood-Look Composite™

Line™

FireGuard™

Teak Composite Horizontal Semi-Privacy Fence Panel with 1-Inch Gaps — 6 ft W × 6 ft H - Surface Mount

Style #:

WPH/G10TK10-72X72-SM

Engineering Dimensions

Nominal size (width × height): 6 × 6 ft.

Mounting Type: Surface Mount.

Fence height: 73 inches.

Gap below the fence: 0 inches.

Post spacing (center to center): 71½ inches.

Clear opening between posts: approximately 68¼ inches.

Post height above ground: 74 inches, excluding the post cap.

Parts and Materials

Standard Post Cap: powder-coated aluminum.

74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.

3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).

Top Rail: powder-coated aluminum.

Bottom Rail: powder-coated aluminum.

Horizontal Connector: aluminum.

#8 x 3/4" ST Screw: 410 stainless steel.

Composite Fence Board: wood-plastic composite (WPC).

Groove Cover: powder-coated aluminum.

1-inch Composite Spacer: powder-coated aluminum.

1-inch Groove Cover: powder-coated aluminum.

This Teak Surface Mount composite fence uses ten boards separated by 1-inch spaces. One horizontal rail set and eighteen spacers belong to the semi privacy fence configuration, selected at a nominal 6 × 6 ft size.

Plan with this layout's 73-inch fence height, 74-inch finished posts and 0-inch bottom gap. The twelve-board Teak privacy section has different dimensions.

Limited warranty periods (residential / commercial use):

Structural defects in Teak boards and covered metal fence parts: up to 25 / 10 years.
Covered Teak board color changes: up to 25 / 10 years.
Coastal metal coating defects: up to 5 / 3 years.
Non-coastal metal coating defects: up to 15 / 10 years.
Covered metal finish fading, all locations: up to 8 / 5 years.

For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.

Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.

Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.

Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.

For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.

Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.

We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.

Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.

This Teak Surface Mount composite fence uses ten boards separated by 1-inch spaces. One horizontal rail set and eighteen spacers belong to the semi privacy fence configuration, selected at a nominal 6 × 6 ft size.
Plan with this layout's 73-inch fence height, 74-inch finished posts and 0-inch bottom gap. The twelve-board Teak privacy section has different dimensions.
Engineering Dimensions
Nominal size (width × height): 6 × 6 ft.
Mounting Type: Surface Mount.
Fence height: 73 inches.
Gap below the fence: 0 inches.
Post spacing (center to center): 71½ inches.
Clear opening between posts: approximately 68¼ inches.
Post height above ground: 74 inches, excluding the post cap.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Top Rail: powder-coated aluminum.
Bottom Rail: powder-coated aluminum.
Horizontal Connector: aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
1-inch Composite Spacer: powder-coated aluminum.
1-inch Groove Cover: powder-coated aluminum.
10 Teak boards form the horizontal infill, with open 1-inch spaces between rows.
The wood-grain finish belongs to the Teak boards rather than the Private Black metal posts.
These composite boards need no routine repainting, staining or sealing treatments.
You supply the ground anchors for the steel posts' welded base plates.
Modern Yard™ 74-inch Steel Post with Welded Base Plate x 1 PC
Modern Yard™ Accessory – 1-Inch Spacer for Horizontal Fence (40-Pack) x 0.45 pack (1-inch Groove Cover x 18 PCs, 1-inch Composite Spacer x 18 PCs)
Modern Yard™ Teak Fence Board x 2.5 packs (10 boards)
Modern Yard™ Horizontal Fence Rail Set x 1 set
Limited warranty periods (residential / commercial use):
Structural defects in Teak boards and covered metal fence parts: up to 25 / 10 years.
Covered Teak board color changes: up to 25 / 10 years.
Coastal metal coating defects: up to 5 / 3 years.
Non-coastal metal coating defects: up to 15 / 10 years.
Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.