top of page

Get a better sense of your project cost and materials.

modern-yard-logo-horizontal-black.webp

Teak Composite Horizontal Semi-Privacy Single Gate with 1-Inch Gaps — 3.5 ft W × 6 ft H - In-Ground

Style #:

WPH/SGG10TK10-42X72-IG

Eight clear openings run through this large Teak horizontal fence gate. Nine full composite board pieces and a solid terminal strip sit in its aluminum frame. Side-groove spacers set each one-inch gap. Teak remains the selected board color throughout the leaf.

The Teak composite material combines wood fiber with recycled plastic. Its textured face gives it a natural wood look. These boards need no regular painting, staining or sealing. This nominal 3.5 × 6 ft single gate uses two galvanized steel posts and a separately ordered combination lock. Include the spacer product with the board order.

Quote this gate with its adjoining fence layout. Mark shared post locations and count each once, using the specified gate post. Browse the large composite fence gate overview for the available leaf layouts.

  • Eight clear openings run through this large Teak horizontal fence gate. Nine full composite board pieces and a solid terminal strip sit in its aluminum frame. Side-groove spacers set each one-inch gap. Teak remains the selected board color throughout the leaf.

    The Teak composite material combines wood fiber with recycled plastic. Its textured face gives it a natural wood look. These boards need no regular painting, staining or sealing. This nominal 3.5 × 6 ft single gate uses two galvanized steel posts and a separately ordered combination lock. Include the spacer product with the board order.

    Quote this gate with its adjoining fence layout. Mark shared post locations and count each once, using the specified gate post. Browse the large composite fence gate overview for the available leaf layouts.

  • Engineering Dimensions

    Nominal size (width × height): 3.5 × 6 ft.

    Mounting Type: In-Ground.

    Gate height: 72 inches.

    Gap below the gate: 1 inch.

    Post spacing (center to center): 45½ inches.

    Clear opening between posts: approximately 42⅜ inches.

    Post height above ground: 74 inches, excluding the post cap.

    Post depth below ground: 40 inches.

    Concrete footing width: 12 inches min.

    Hinge positions: 8 / 28½ / 8 inches.

    Parts and Materials

    Standard Post Cap: powder-coated aluminum.

    114-inch Steel Post: powder-coated galvanized steel.

    3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).

    71 x 42-inch Welded Gate Frame: powder-coated aluminum.

    Gate Frame Cover Strip: powder-coated aluminum.

    #8 x 3/4" ST Screw: 410 stainless steel.

    #8 x 1-1/4" ST Screw: 410 stainless steel.

    #10 x 1" ST Screw: 410 stainless steel.

    Composite Fence Board: wood-plastic composite (WPC).

    Gate Stopper: powder-coated aluminum.

    Gate Stop Cover Plate: powder-coated aluminum.

    Hinge: powder-coated aluminum.

    Groove Cover: powder-coated aluminum.

    Mechanical Combination Lock: 304 stainless steel.

    1-inch Composite Spacer: powder-coated aluminum.

    • The Teak infill includes nine full horizontal pieces and one end strip.
    • One-inch clear spaces create eight view openings in the leaf.
    • The Teak board faces resist moisture and decay.
    • Sixteen installed spacers belong to this single-gate spacing schedule.
  • Limited warranty periods (residential / commercial use):

    • Structural defects in Teak boards and covered metal gate parts: up to 25 / 10 years.
    • Covered Teak board color changes: up to 25 / 10 years.
    • Coastal metal coating defects: up to 5 / 3 years.
    • Non-coastal metal coating defects: up to 15 / 10 years.
    • Covered metal finish fading, all locations: up to 8 / 5 years.

    For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.

    Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes. The combination lock is outside the periods listed above. Contact Modern Yard for the applicable separate warranty terms.

    Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.

    Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.

    For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.

    Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.

    We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.

    Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.

Related Components

Modern Yard 114-inch galvanized steel fence post with compatible fence system components

Modern Yard™ 114-Inches Steel Post

Modern Yard Teak composite fence board with natural wood-look finish on a white background

Modern Yard™ Teak Fence Board (4-Pack)

Modern Yard 71 x 42 aluminum gate frame on a white background

Modern Yard™ 71 Inches x 42 Inches Gate Frame

Modern Yard 304 stainless steel mechanical combination gate lock

Modern Yard™ Stainless Steel Mechanical Combination Lock

Modern Yard 1-inch spacer for horizontal fence installation

Modern Yard™ Accessory – 1-Inch Spacer for Horizontal Fence (40-Pack)

Imagine Your Future Fence

​Installation Guides

Installation Manual

​Technical Drawing


Frequently asked questions

The side spacers set an inch of clear space at eight positions. A solid strip finishes the end of the board stack.

This single leaf uses sixteen spacers from one 40-piece pack; the double-gate quantity does not apply.

Order the mechanical combination lock separately. It fits the prepared frame opening. List the lock with the Teak spaced leaf in your single-leaf material quote.

bottom of page