top of page

Get a better sense of your project cost and materials.

modern-yard-logo-horizontal-black.webp

Teak Composite Horizontal Full Privacy Single Gate — 3.5 ft W × 6 ft H - In-Ground

Style #:

WPH/SGFPTK11-42X72-IG

Eleven horizontal Teak pieces form the closed infill of this composite fence gate. The nominal 3.5 × 6 ft single leaf combines a welded aluminum gate frame with two galvanized steel posts. Assemble the eleven board pieces on site within the welded frame.

Teak names the wood-grain composite color. The material blends wood fibers and recycled plastic, with surfaces that resist moisture, insects, rot and fading. The board faces need no regular painting, staining or sealing.

The gate frame, posts, Teak boards and stainless steel mechanical combination lock are separate products. Eleven original boards supply the cut pieces, recorded as a 2.75-pack share. For this gate alone, three four-board packs provide twelve originals and leave one unused. A larger quote can combine compatible stock before rounding the packs.

The drawing specifies a 72-inch gate height and a separate one-inch ground clearance. The 114-inch posts extend 74 inches above ground, excluding caps, with 40 inches below. Use this gate's opening and support dimensions when planning the installation.

Explore the composite fence gate formats and board choices for the available infill directions. For adjoining composite fencing, list each fixed fence panel and the gate in the same plan. Count shared supports once and retain this gate's specified post at each connection.

  • Eleven horizontal Teak pieces form the closed infill of this composite fence gate. The nominal 3.5 × 6 ft single leaf combines a welded aluminum gate frame with two galvanized steel posts. Assemble the eleven board pieces on site within the welded frame.

    Teak names the wood-grain composite color. The material blends wood fibers and recycled plastic, with surfaces that resist moisture, insects, rot and fading. The board faces need no regular painting, staining or sealing.

    The gate frame, posts, Teak boards and stainless steel mechanical combination lock are separate products. Eleven original boards supply the cut pieces, recorded as a 2.75-pack share. For this gate alone, three four-board packs provide twelve originals and leave one unused. A larger quote can combine compatible stock before rounding the packs.

    The drawing specifies a 72-inch gate height and a separate one-inch ground clearance. The 114-inch posts extend 74 inches above ground, excluding caps, with 40 inches below. Use this gate's opening and support dimensions when planning the installation.

    Explore the composite fence gate formats and board choices for the available infill directions. For adjoining composite fencing, list each fixed fence panel and the gate in the same plan. Count shared supports once and retain this gate's specified post at each connection.

  • Engineering Dimensions

    Nominal size (width × height): 3.5 × 6 ft.

    Mounting Type: In-Ground.

    Gate height: 72 inches.

    Gap below the gate: 1 inch.

    Post spacing (center to center): 45½ inches.

    Clear opening between posts: approximately 42⅜ inches.

    Post height above ground: 74 inches, excluding the post cap.

    Post depth below ground: 40 inches.

    Concrete footing width: 12 inches min.

    Hinge positions: 8 / 28½ / 8 inches.

    Parts and Materials

    Standard Post Cap: powder-coated aluminum.

    114-inch Steel Post: powder-coated galvanized steel.

    3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).

    71 x 42-inch Welded Gate Frame: powder-coated aluminum.

    Gate Frame Cover Strip: powder-coated aluminum.

    #8 x 3/4" ST Screw: 410 stainless steel.

    #8 x 1-1/4" ST Screw: 410 stainless steel.

    #10 x 1" ST Screw: 410 stainless steel.

    Composite Fence Board: wood-plastic composite (WPC).

    Gate Stopper: powder-coated aluminum.

    Gate Stop Cover Plate: powder-coated aluminum.

    Hinge: powder-coated aluminum.

    Groove Cover: powder-coated aluminum.

    Mechanical Combination Lock: 304 stainless steel.

    • Eleven joined Teak pieces establish the horizontal full-privacy face.
    • The wood-grain composite resists moisture, insects, rot and fading.
    • Teak surfaces need no regular painting, staining or sealing.
    • A welded aluminum frame and galvanized steel posts support the single leaf.
  • Limited warranty periods (residential / commercial use):

    • Structural defects in Teak boards and covered metal gate parts: up to 25 / 10 years.
    • Covered Teak board color changes: up to 25 / 10 years.
    • Coastal metal coating defects: up to 5 / 3 years.
    • Non-coastal metal coating defects: up to 15 / 10 years.
    • Covered metal finish fading, all locations: up to 8 / 5 years.

    For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.

    Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes. The combination lock is outside the periods listed above. Contact Modern Yard for the applicable separate warranty terms.

    Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.

    Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.

    For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.

    Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.

    We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.

    Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.

Related Components

Modern Yard 114-inch galvanized steel fence post with compatible fence system components

Modern Yard™ 114-Inches Steel Post

Modern Yard Teak composite fence board with natural wood-look finish on a white background

Modern Yard™ Teak Fence Board (4-Pack)

Modern Yard 71 x 42 aluminum gate frame on a white background

Modern Yard™ 71 Inches x 42 Inches Gate Frame

Modern Yard 304 stainless steel mechanical combination gate lock

Modern Yard™ Stainless Steel Mechanical Combination Lock

Imagine Your Future Fence

​Installation Guides

Installation Manual

​Technical Drawing


Frequently asked questions

Teak identifies the composite board color. Wood fibers and recycled plastic form the infill material, with a wood-grain surface. Select the Teak board packs for this horizontal layout.

Order the stainless steel mechanical combination lock separately from the frame, boards and post products. Component Needs lists each product group for the selected single gate.

Show the gate opening and adjacent fence sections in the project quote form. When comparing fencing systems, check the gate opening and support dimensions as well as the fixed sections. Count shared support locations once and keep the specified gate posts. Include the board direction, Teak color and nominal 3.5 × 6 ft size.

bottom of page