Six Teak composite boards stand upright, joining into closed infill inside an aluminum frame. Two galvanized steel posts support the single leaf. The nominal 3.5 × 6 ft size lists width first.
Buy Teak board packs, the large frame and combination lock as separate products. The boards blend wood fiber with recycled plastic. Check the engineering dimensions for the opening. Compare our composite fence gates for horizontal and vertical board layouts.
Six Teak composite boards stand upright, joining into closed infill inside an aluminum frame. Two galvanized steel posts support the single leaf. The nominal 3.5 × 6 ft size lists width first.
Buy Teak board packs, the large frame and combination lock as separate products. The boards blend wood fiber with recycled plastic. Check the engineering dimensions for the opening. Compare our composite fence gates for horizontal and vertical board layouts.
Engineering Dimensions
Nominal size (width × height): 3.5 × 6 ft.
Mounting Type: In-Ground.
Gate height: 72 inches.
Gap below the gate: 1 inch.
Post spacing (center to center): 45½ inches.
Clear opening between posts: approximately 42⅜ inches.
Post height above ground: 74 inches, excluding the post cap.
Post depth below ground: 40 inches.
Concrete footing width: 12 inches min.
Hinge positions: 8 / 28½ / 8 inches.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
114-inch Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
71 x 42-inch Welded Gate Frame: powder-coated aluminum.
Gate Frame Cover Strip: powder-coated aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
#8 x 1-1/4" ST Screw: 410 stainless steel.
#10 x 1" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Gate Stopper: powder-coated aluminum.
Gate Stop Cover Plate: powder-coated aluminum.
Hinge: powder-coated aluminum.
Groove Cover: powder-coated aluminum.
Mechanical Combination Lock: 304 stainless steel.
- The selected Teak boards run upright across the leaf.
- Six joined pieces form the closed composite infill.
- An aluminum frame holds the boards between two galvanized steel posts.
- Teak boards have a wood-look face and resist decay and insects.
- Modern Yard™ 114-inch Steel Post x 2 PCs
- Modern Yard™ 71-inch x 42-inch Door Frame x 1 set
- Modern Yard™ Teak Fence Board x 1.5 packs (6 boards)
- Modern Yard™ Stainless Steel Mechanical Combination Lock x 1 set
Limited warranty periods (residential / commercial use):
- Structural defects in Teak boards and covered metal gate parts: up to 25 / 10 years.
- Covered Teak board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes. The combination lock is outside the periods listed above. Contact Modern Yard for the applicable separate warranty terms.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently asked questions
How many Teak board packs should I buy for one gate?
This composite fence gate uses six upright pieces from two four-board Teak packs. For a combined order, add the raw board needs for both the Teak fence and gate before rounding the packs.
Do the vertical boards have one-inch openings between them?
Joined board edges give this Teak leaf a closed face. The full-privacy layout uses no one-inch spacers.
What do I specify when ordering a fence panel with this gate?
Show Teak, vertical full privacy and the large single-gate format in a combined materials quote. Mark any shared post locations. Use the gate post at each shared position and count it once.
You Might Also Like
In-Ground
Without Crossbeam
Style #: WPV/SGFPTK6-42X42-IG
In-Ground
With Crossbeam
Style #: WPV/SGFPTK6-42X72-CB-IG
In-Ground
Without Crossbeam
Style #: WPV/SGDP16P01TK4DP1-42X72-IG
In-Ground
Without Crossbeam
Style #: WPH/SGG10TK10-42X72-IG
In-Ground
Without Crossbeam
Style #: WPH/SGFPTK11-42X72-IG
In-Ground
With Crossbeam
Style #: WPH/SGFPTK11-42X72-CB-IG


























