This Teak composite fence gate leaves the specified gaps between horizontal boards. Horizontal infill leaves 1-inch spaces, and the two aluminum frames are assembled with the matching spacing components. The full layout contains 18 main boards plus two supplemental strips across both leaves.
The additional LINE crossbeam belongs to the 7 ft fence junction. The double fence gate below it is nominally 6 ft high and 7 ft wide overall. For this version, two 114-inch posts are set with 86 inches above ground and 28 inches embedded. Keep the board stock, installed pieces and beam allocation clear in the order. Our composite gate range provides the alternative privacy and direction layouts.
This Teak composite fence gate leaves the specified gaps between horizontal boards. Horizontal infill leaves 1-inch spaces, and the two aluminum frames are assembled with the matching spacing components. The full layout contains 18 main boards plus two supplemental strips across both leaves.
The additional LINE crossbeam belongs to the 7 ft fence junction. The double fence gate below it is nominally 6 ft high and 7 ft wide overall. For this version, two 114-inch posts are set with 86 inches above ground and 28 inches embedded. Keep the board stock, installed pieces and beam allocation clear in the order. Our composite gate range provides the alternative privacy and direction layouts.
Engineering Dimensions
Nominal size (width × height): 7 × 6 ft.
Mounting Type: In-Ground.
Gate height: 72 inches.
Gap below the gate: 1 inch.
Post spacing (center to center): 87⅛ inches.
Clear opening between posts: approximately 84 inches.
Post height above ground: 86 inches, excluding the post cap.
Crossbeam top: 2 inches below the post top.
Post depth below ground: 28 inches.
Concrete footing width: 12 inches min.
Hinge positions: 8 / 28½ / 8 inches.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
114-inch Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
71 x 42-inch Welded Gate Frame: powder-coated aluminum.
Gate Frame Cover Strip: powder-coated aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
#8 x 1-1/4" ST Screw: 410 stainless steel.
#10 x 1" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Gate Stopper: powder-coated aluminum.
Gate Stop Cover Plate: powder-coated aluminum.
Hinge: powder-coated aluminum.
Groove Cover: powder-coated aluminum.
Crossbeam: powder-coated galvanized steel.
Base Connector: powder-coated aluminum.
L Connector: 201 stainless steel.
Mechanical Combination Lock: 304 stainless steel.
Outdoor Gate Handle Set with Drop Rod: 304 stainless steel.
#8 x 3/4" ST Screw: 316 stainless steel.
1-inch Spacer: powder-coated aluminum.
- Teak boards are arranged horizontally with 1-inch spaces.
- Twenty composite pieces form the complete two-leaf infill layout.
- The frame pair is supplied separately for assembly on site.
- A single overhead beam is specified alongside the 86/28-inch post layout.
- Modern Yard™ 114-inch Steel Post x 2 PCs
- Modern Yard™ 71-inch x 42-inch Door Frame x 2 sets
- Modern Yard™ Teak Fence Board x 5 packs (20 boards)
- Modern Yard™ Stainless Steel Mechanical Combination Lock x 1 set
- Modern Yard™ Stainless Steel Outdoor Gate Handle Set with Drop Rod x 1 set
- Modern Yard™ Accessory – 1-Inch Spacer for Horizontal Fence (40-Pack) x 0.8 pack (1-inch Spacer x 32 PCs)
- Modern Yard Line™ Fence Slat x 0.5 pack (1 crossbeam after cutting)
- Modern Yard™ Full-Privacy Hardware Kit for 1-Inch Fence Slats x 0.5 set (Base Connector x 2 PCs, L Connector x 2 PCs, #8 x 3/4" ST Screw x 8 PCs)
Limited warranty periods (residential / commercial use):
- Structural defects in Teak boards and covered metal gate parts: up to 25 / 10 years.
- Covered Teak board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes. The combination lock and outdoor handle set are outside the periods listed above. Contact Modern Yard for the applicable separate warranty terms.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Related Components
Frequently asked questions
Does the 1-inch spacing apply to the overhead beam?
It describes the gate infill layout. The crossbeam is a separate LINE part with its own length and fittings; do not use the board-gap dimension to locate it.
Do five packs mean five gate leaves?
No. Five four-board packs are the stock allocation for this two-leaf configuration. The installation description also identifies the main pieces and supplemental strips.
Can this gate be treated as a 7 ft-high privacy screen?
No. Its leaves are nominally 6 ft high and have visible gaps. The 7 ft fence connection does not remove those spaces or increase leaf height.
You Might Also Like
In-Ground
Without Crossbeam
Style #: WPH/DGG10TK20-84X72-IG
In-Ground
With Crossbeam
Style #: WPH/DGFPTK22-84X72-CB-IG
In-Ground
With Crossbeam
Style #: WPH/DGDP16P01TK18DP2-84X72-CB-IG
In-Ground
Without Crossbeam
Style #: WPH/DGFPTK22-84X72-IG
In-Ground
Without Crossbeam
Style #: WPH/DGDP16P01TK18DP2-84X72-IG
In-Ground
With Crossbeam
Style #: WPV/DGFPTK12-84X72-CB-IG






























