top of page

Get a better sense of your project cost and materials.

modern-yard-logo-horizontal-black.webp

Charcoal and Teak Composite Horizontal Full Privacy Single Gate with Crossbeam — 3 Charcoal Boards + 8 Teak Boards — 3.5 ft W × 6 ft H - In-Ground

Style #:

WPH/SGFPCH3TK8-42X72-CB-IG

Specify both colors when ordering this composite fence gate. The horizontal full-privacy leaf uses three Charcoal boards and eight Teak boards, for eleven installed boards in total. The two colors are separate stock requirements rather than a single mixed-board sales pack.

This Crossbeam configuration is intended for the specified connection to a 7 ft fence. The moving leaf remains nominally 3.5 ft wide by 6 ft high inside its aluminum frame, with a separately purchased LINE member overhead and two In-Ground steel posts. Review horizontal composite fence choices when coordinating the fixed run. For mixed-color composite fence gates, include each board color, its source quantity and the overhead fixing components in the quote.

  • Specify both colors when ordering this composite fence gate. The horizontal full-privacy leaf uses three Charcoal boards and eight Teak boards, for eleven installed boards in total. The two colors are separate stock requirements rather than a single mixed-board sales pack.

    This Crossbeam configuration is intended for the specified connection to a 7 ft fence. The moving leaf remains nominally 3.5 ft wide by 6 ft high inside its aluminum frame, with a separately purchased LINE member overhead and two In-Ground steel posts. Review horizontal composite fence choices when coordinating the fixed run. For mixed-color composite fence gates, include each board color, its source quantity and the overhead fixing components in the quote.

  • Engineering Dimensions

    Nominal size (width × height): 3.5 × 6 ft.

    Mounting Type: In-Ground.

    Gate height: 72 inches.

    Gap below the gate: 1 inch.

    Post spacing (center to center): 45⅝ inches.

    Clear opening between posts: approximately 42½ inches.

    Post height above ground: 86 inches, excluding the post cap.

    Crossbeam top: 2 inches below the post top.

    Post depth below ground: 28 inches.

    Concrete footing width: 12 inches min.

    Hinge positions: 8 / 28½ / 8 inches.

    Parts and Materials

    Standard Post Cap: powder-coated aluminum.

    114-inch Steel Post: powder-coated galvanized steel.

    3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).

    71 x 42-inch Welded Gate Frame: powder-coated aluminum.

    Gate Frame Cover Strip: powder-coated aluminum.

    #8 x 3/4" ST Screw: 410 stainless steel.

    #8 x 1-1/4" ST Screw: 410 stainless steel.

    #10 x 1" ST Screw: 410 stainless steel.

    Composite Fence Board: wood-plastic composite (WPC).

    Gate Stopper: powder-coated aluminum.

    Gate Stop Cover Plate: powder-coated aluminum.

    Hinge: powder-coated aluminum.

    Groove Cover: powder-coated aluminum.

    Crossbeam: powder-coated galvanized steel.

    Base Connector: powder-coated aluminum.

    L Connector: 201 stainless steel.

    Mechanical Combination Lock: 304 stainless steel.

    • The leaf recipe combines three Charcoal boards with eight Teak boards.
    • Both composite colors are retained as separate stock entries.
    • One separately purchased LINE member forms the overhead crossbeam.
    • The selected installation connects a nominal 6 ft leaf to a 7 ft fence run.
  • Limited warranty periods (residential / commercial use):

    • Structural defects in Charcoal and Teak boards and covered metal gate parts: up to 25 / 10 years.
    • Covered Charcoal and Teak board color changes: up to 25 / 10 years.
    • Coastal metal coating defects: up to 5 / 3 years.
    • Non-coastal metal coating defects: up to 15 / 10 years.
    • Covered metal finish fading, all locations: up to 8 / 5 years.

    For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.

    Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes. The combination lock is outside the periods listed above. Contact Modern Yard for the applicable separate warranty terms.

    Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.

    Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.

    For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.

    Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.

    We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.

    Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.

Related Components

Modern Yard 114-inch galvanized steel fence post with compatible fence system components

Modern Yard™ 114-Inches Steel Post

Modern Yard Charcoal composite fence board with dark wood-look finish on a white background

Modern Yard™ Charcoal Fence Board (4-Pack)

Modern Yard Teak composite fence board with natural wood-look finish on a white background

Modern Yard™ Teak Fence Board (4-Pack)

Modern Yard LINE 1 x 4 x 8 ft galvanized steel fence slat with dark powder-coated finish

Modern Yard Line™ Fence Slat - 1 in. x 4 in. x 8 ft (2-Pack)

Modern Yard 71 x 42 aluminum gate frame on a white background

Modern Yard™ 71 Inches x 42 Inches Gate Frame

Modern Yard 304 stainless steel mechanical combination gate lock

Modern Yard™ Stainless Steel Mechanical Combination Lock

Modern Yard full-privacy hardware kit for 1-inch horizontal fence slats

Modern Yard™ Full-Privacy Hardware Kit for 1-Inch Fence Slats

Imagine Your Future Fence

​Installation Guides

Installation Manual

​Technical Drawing


Frequently asked questions

No. The leaf retains three Charcoal and eight Teak boards. The dedicated Crossbeam model changes the external installation and adds the separate overhead LINE requirement.

The source lists the colors separately: 0.75 four-board pack of Charcoal and two four-board packs of Teak as material shares. Final whole-pack purchasing is resolved with the order.

No. This single gate uses one crossbeam. The color quantities apply to the leaf infill, while LINE stock and its hardware are listed separately.


bottom of page