Nine Redwood boards make up this tall Surface Mount composite fence with spaced panels. Four rail sets frame the separate groups of the nominal 6 × 6 ft semi privacy fence, leaving open breaks between them.
Use this layout's 74-inch finished posts, 72-inch fence height and ½-inch bottom gap. Its nine-board, four-rail-set recipe differs from Redwood privacy and uniform-gap options.
Nine Redwood boards make up this tall Surface Mount composite fence with spaced panels. Four rail sets frame the separate groups of the nominal 6 × 6 ft semi privacy fence, leaving open breaks between them.
Use this layout's 74-inch finished posts, 72-inch fence height and ½-inch bottom gap. Its nine-board, four-rail-set recipe differs from Redwood privacy and uniform-gap options.
Engineering Dimensions
Nominal size (width × height): 6 × 6 ft.
Mounting Type: Surface Mount.
Fence height: 72 inches.
Gap below the fence: ½ inch.
Post spacing (center to center): 71½ inches.
Clear opening between posts: approximately 68¼ inches.
Post height above ground: 74 inches, excluding the post cap.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Top Rail: powder-coated aluminum.
Bottom Rail: powder-coated aluminum.
Horizontal Connector: aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
- Nine Redwood boards form separately framed horizontal groups with open spaces between them.
- Redwood wood-grain faces give the spaced-panel design the appearance of wood.
- Regular care of these composite boards does not involve repainting, staining or sealing.
- Customers provide the ground anchors for the welded base plates on the steel posts.
- Modern Yard™ 74-inch Steel Post with Welded Base Plate x 1 PC
- Modern Yard™ Redwood Fence Board x 2.25 packs (9 boards)
- Modern Yard™ Horizontal Fence Rail Set x 4 sets
Limited warranty periods (residential / commercial use):
- Structural defects in Redwood boards and covered metal fence parts: up to 25 / 10 years.
- Covered Redwood board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
What is the main component difference from a Redwood privacy panel?
This spaced-panel configuration uses nine boards and four rail sets. The 6 ft full-privacy version uses twelve boards and one rail set.
Is the rail quantity four individual rail pieces?
Four Horizontal Fence Rail Sets are required. Each set supplies a top and bottom rail for one board group.
Who supplies the anchors for the tall Redwood spaced-panel fence?
You supply anchors for the welded base plates separately from the Redwood boards and rail sets.
You Might Also Like
Surface Mount
Style #: WPH/SPRD4-72X42-SM
Surface Mount
Style #: WPH/FPRD12-72X72-SM
Surface Mount
Style #: WPH/G10RD10-72X72-SM
Surface Mount
Style #: WPH/DP16P01RD10DP1-72X72-SM





















