Redwood 7 ft Vertical Slat-Top Fence

Redwood Wood-Look Vertical Composite Fence with Steel Slatted Top — 8 × 7 Feet — In-Ground

FENCE COLLECTIONS

Wood-Look Composite™

Line™

FireGuard™

Redwood Composite Vertical Fence Panel with LINE Slatted Top — 8 ft W × 7 ft H - In-Ground

Style #:

WPV/STRD16LNPB2-96X84-IG

Engineering Dimensions

Nominal size (width × height): 8 × 7 ft.

Mounting Type: In-Ground.

Fence height: 84 inches.

Gap below the fence: 1 inch.

Post spacing (center to center): 96⅜ inches.

Clear opening between posts: approximately 93¼ inches.

Post height above ground: 86 inches, excluding the post cap.

Post depth below ground: 28 inches.

Concrete footing width: 12 inches min.

Parts and Materials

Standard Post Cap: powder-coated aluminum.

114-inch Steel Post: powder-coated galvanized steel.

3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).

Composite Fence Board: wood-plastic composite (WPC).

Groove Cover: powder-coated aluminum.

U Rail: powder-coated galvanized steel.

End Cap: PA6.

Top Rail Connector: powder-coated aluminum.

Bottom Rail Connector: powder-coated aluminum.

#8 x 3/4" ST Screw: 410 stainless steel.

Line™ Fence Slat: powder-coated galvanized steel.

Base Connector: powder-coated aluminum.

Stackable Connector: powder-coated aluminum.

L Connector: 201 stainless steel.

Sixteen upright Redwood boards and two Private Black LINE slats form this composite fence panel. The nominal 8 × 7 ft format includes a joined wood-grain body with open spaces in the steel top.

The composite blends wood fibers and recycled plastic. Redwood faces resist moisture, insects, rot and fading without regular painting, staining or sealing. The upper slats use powder-coated galvanized steel, with a protective finish that helps resist corrosion and outdoor wear.

Four Redwood packs and one LINE pack supply the infill. Order the Vertical Fence Rail Set, top-slat hardware and 114-inch posts separately. Compare the vertical composite fencing overview for other board-and-rail layouts.

Limited warranty periods (residential / commercial use):

Structural defects in Redwood boards and covered metal fence parts: up to 25 / 10 years.
Covered Redwood board color changes: up to 25 / 10 years.
Coastal metal coating defects: up to 5 / 3 years.
Non-coastal metal coating defects: up to 15 / 10 years.
Covered metal finish fading, all locations: up to 8 / 5 years.

For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.

Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.

Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.

Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.

For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.

Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.

We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.

Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.

Sixteen upright Redwood boards and two Private Black LINE slats form this composite fence panel. The nominal 8 × 7 ft format includes a joined wood-grain body with open spaces in the steel top.
The composite blends wood fibers and recycled plastic. Redwood faces resist moisture, insects, rot and fading without regular painting, staining or sealing. The upper slats use powder-coated galvanized steel, with a protective finish that helps resist corrosion and outdoor wear.
Four Redwood packs and one LINE pack supply the infill. Order the Vertical Fence Rail Set, top-slat hardware and 114-inch posts separately. Compare the vertical composite fencing overview for other board-and-rail layouts.
Engineering Dimensions
Nominal size (width × height): 8 × 7 ft.
Mounting Type: In-Ground.
Fence height: 84 inches.
Gap below the fence: 1 inch.
Post spacing (center to center): 96⅜ inches.
Clear opening between posts: approximately 93¼ inches.
Post height above ground: 86 inches, excluding the post cap.
Post depth below ground: 28 inches.
Concrete footing width: 12 inches min.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
114-inch Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
U Rail: powder-coated galvanized steel.
End Cap: PA6.
Top Rail Connector: powder-coated aluminum.
Bottom Rail Connector: powder-coated aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Line™ Fence Slat: powder-coated galvanized steel.
Base Connector: powder-coated aluminum.
Stackable Connector: powder-coated aluminum.
L Connector: 201 stainless steel.
Redwood wood-grain composite creates the joined vertical board body.
Two horizontal Private Black LINE slats form the open upper detail.
The composite faces resist moisture, insects, rot and fading without regular coatings.
Separate rail and connector products support the composite and steel infill areas.
Modern Yard™ 114-inch Steel Post x 1 PC
Modern Yard™ Redwood Fence Board x 4 packs (16 boards)
Modern Yard™ Vertical Fence Rail Set x 1 set
Modern Yard Line™ Fence Slat x 1 pack (2 slats)
Modern Yard™ Semi-Privacy Hardware Kit for 1-Inch Fence Slats x 0.2 set (Base Connector x 6 PCs, Stackable Connector x 2 PCs, L Connector x 2 PCs)
Limited warranty periods (residential / commercial use):
Structural defects in Redwood boards and covered metal fence parts: up to 25 / 10 years.
Covered Redwood board color changes: up to 25 / 10 years.
Coastal metal coating defects: up to 5 / 3 years.
Non-coastal metal coating defects: up to 15 / 10 years.
Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.