This Surface Mount composite fence uses four Charcoal boards as separate rail-framed groups. Approximately 4-inch openings give the nominal 6 × 3.5 ft section its spaced pattern. Compare semi-privacy fence layouts when choosing the infill.
The wood plastic composite boards have a wood grain texture. Four aluminum rail sets and galvanized steel posts form the fence system. Welded base plates provide the Surface Mount connection, with customer-supplied ground anchors.
This Surface Mount composite fence uses four Charcoal boards as separate rail-framed groups. Approximately 4-inch openings give the nominal 6 × 3.5 ft section its spaced pattern. Compare semi-privacy fence layouts when choosing the infill.
The wood plastic composite boards have a wood grain texture. Four aluminum rail sets and galvanized steel posts form the fence system. Welded base plates provide the Surface Mount connection, with customer-supplied ground anchors.
Engineering Dimensions
Nominal size (width × height): 6 × 3.5 ft.
Mounting Type: Surface Mount.
Fence height: 42 inches.
Gap below the fence: ½ inch.
Post spacing (center to center): 71½ inches.
Clear opening between posts: approximately 68¼ inches.
Post height above ground: 44 inches, excluding the post cap.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
74-inch Steel Post with Welded Base Plate: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Top Rail: powder-coated aluminum.
Bottom Rail: powder-coated aluminum.
Horizontal Connector: aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
- Four Charcoal boards form distinct framed rows with open gaps.
- Each wood-grain board has its own top and bottom rails.
- Mild soap and water suit everyday composite board cleaning.
- Welded-base steel posts support the Surface Mount assembly.
- Modern Yard™ 74-inch Steel Post with Welded Base Plate x 1 PC
- Modern Yard™ Charcoal Fence Board x 1 pack (4 boards)
- Modern Yard™ Horizontal Fence Rail Set x 4 sets
Limited warranty periods (residential / commercial use):
- Structural defects in Charcoal boards and covered metal fence parts: up to 25 / 10 years.
- Covered Charcoal board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
Does this design use the standard 1-inch Composite Spacers?
No. The spaced-panel design is built with four boards and four horizontal rail sets. It is not the 1-inch-gap board configuration.
Why does Component Needs list four rail sets?
The four railed board sections are part of this specific spaced-panel assembly, rather than one continuous board stack.
Are the anchors included for the short spaced-panel posts?
The customer supplies the ground anchors for the short spaced-panel posts.
You Might Also Like
Surface Mount
Style #: WPH/SPCH9-72X72-SM
Surface Mount
Style #: WPH/FPCH7-72X42-SM
Surface Mount
Charcoal Composite Horizontal Fence Panel with a 1 × 6 ft Decorative Panel (P01) — 6 ft W × 3.5 ft H
Style #: WPH/DP16P01CH5DP1-72X42-SM
Surface Mount
Style #: WPH/G10CH5-72X36-SM





















