This vertical composite fencing section combines a Charcoal board body with an open steel top. Sixteen short upright pieces fill the lower area. Two horizontal LINE slats complete the nominal 8 × 4 ft layout.
Charcoal composite fence boards blend wood fibers and recycled plastic. A UV-protected wrap covers the core and helps resist fading from sun exposure. The faces also resist moisture, termites and decay.
The composite fencing system uses steel posts and U rails around the upright boards. Separate connectors carry the two Private Black top slats. Compare the vertical composite fence collection before choosing the full panel pattern.
This vertical composite fencing section combines a Charcoal board body with an open steel top. Sixteen short upright pieces fill the lower area. Two horizontal LINE slats complete the nominal 8 × 4 ft layout.
Charcoal composite fence boards blend wood fibers and recycled plastic. A UV-protected wrap covers the core and helps resist fading from sun exposure. The faces also resist moisture, termites and decay.
The composite fencing system uses steel posts and U rails around the upright boards. Separate connectors carry the two Private Black top slats. Compare the vertical composite fence collection before choosing the full panel pattern.
Engineering Dimensions
Nominal size (width × height): 8 × 4 ft.
Mounting Type: In-Ground.
Fence height: 48 inches.
Gap below the fence: ½ inch.
Post spacing (center to center): 96⅜ inches.
Clear opening between posts: approximately 93¼ inches.
Post height above ground: 50 inches, excluding the post cap.
Post depth below ground: 16 inches.
Concrete footing width: 12 inches min.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
98-inch Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
U Rail: powder-coated galvanized steel.
End Cap: PA6.
Top Rail Connector: powder-coated aluminum.
Bottom Rail Connector: powder-coated aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Line™ Fence Slat: powder-coated galvanized steel.
Base Connector: powder-coated aluminum.
Stackable Connector: powder-coated aluminum.
L Connector: 201 stainless steel.
- Sixteen upright Charcoal pieces form the joined lower body.
- Two spaced LINE steel slats create the open top detail.
- Charcoal board faces resist fading, moisture, termites and decay.
- The composite faces need no regular painting, staining or sealing.
- Modern Yard™ 98-inch Steel Post x 1 PC
- Modern Yard™ Charcoal Fence Board x 2 packs (8 full-length boards; 16 installed pieces after cutting)
- Modern Yard™ Vertical Fence Rail Set x 1 set
- Modern Yard Line™ Fence Slat x 1 pack (2 slats)
- Modern Yard™ Semi-Privacy Hardware Kit for 1-Inch Fence Slats x 0.2 set (Base Connector x 6 PCs, Stackable Connector x 2 PCs, L Connector x 2 PCs)
Limited warranty periods (residential / commercial use):
- Structural defects in Charcoal boards and covered metal fence parts: up to 25 / 10 years.
- Covered Charcoal board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
Does the four-foot height include the metal top?
The nominal four-foot format includes both infill areas. The drawing lists a 48-inch fence height for the complete section.
Which rail and hardware products support the two materials?
The lower boards need one Vertical Fence Rail Set. The top slats use the listed semi-privacy hardware kit. Its 0.2-set allowance records one panel's share. Combine hardware needs across the whole run, then order complete sets and check the connector totals.
Are all sixteen composite pieces bought as full-length boards?
Sixteen refers to installed pieces after cutting. Each full-length Charcoal board supplies two pieces for this pattern, so eight originals are enough. Order two four-board packs plus one two-slat LINE pack. The board body and metal top remain separate infill purchases.
You Might Also Like
In-Ground
Style #: WPV/STCH16LNPB2-96X84-IG
In-Ground
Style #: WPV/FPCH16-96X36-IG
In-Ground
Charcoal Composite Horizontal Fence Panel with a 1 × 6 ft Decorative Panel (P01) — 6 ft W × 3.5 ft H
Style #: WPH/DP16P01CH5DP1-72X42-IG






















