Modern Yard™ pairs five Redwood boards with four 1-inch openings in this semi privacy composite fence. The horizontal fence panel is nominally 6 ft wide and 3 ft high. Its separate ½-inch ground gap sits beneath the bottom rail.
The Redwood composite boards blend natural wood fibers with recycled plastic and have a wood-grain surface. They resist moisture and insect damage. Their regular care does not call for painting, staining or sealing; use mild soap, water and a soft brush or cloth on the boards.
Private Black powder-coated galvanized steel posts and aluminum rails frame the spaced rows. The In-Ground configuration uses buried posts. The board-care instructions apply to the composite infill; follow the separate care requirements for metal components.
For a longer run, plan the horizontal composite fence systems and components. Count shared posts once, then add any free-standing end post. Total the Redwood boards and spacers across the project before rounding purchases to whole packs.
Modern Yard™ pairs five Redwood boards with four 1-inch openings in this semi privacy composite fence. The horizontal fence panel is nominally 6 ft wide and 3 ft high. Its separate ½-inch ground gap sits beneath the bottom rail.
The Redwood composite boards blend natural wood fibers with recycled plastic and have a wood-grain surface. They resist moisture and insect damage. Their regular care does not call for painting, staining or sealing; use mild soap, water and a soft brush or cloth on the boards.
Private Black powder-coated galvanized steel posts and aluminum rails frame the spaced rows. The In-Ground configuration uses buried posts. The board-care instructions apply to the composite infill; follow the separate care requirements for metal components.
For a longer run, plan the horizontal composite fence systems and components. Count shared posts once, then add any free-standing end post. Total the Redwood boards and spacers across the project before rounding purchases to whole packs.
Engineering Dimensions
Nominal size (width × height): 6 × 3 ft.
Mounting Type: In-Ground.
Fence height: 37 inches.
Gap below the fence: ½ inch.
Post spacing (center to center): 71½ inches.
Clear opening between posts: approximately 68¼ inches.
Post height above ground: 39 inches, excluding the post cap.
Post depth below ground: 13 inches.
Concrete footing width: 12 inches min.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
114-inch Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Top Rail: powder-coated aluminum.
Bottom Rail: powder-coated aluminum.
Horizontal Connector: aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
1-inch Composite Spacer: powder-coated aluminum.
1-inch Groove Cover: powder-coated aluminum.
- Five Redwood boards create modern horizontal infill with 1-inch openings.
- Eight aluminum spacers set four openings; separate 1-inch groove covers fill the post slots at those gaps.
- The Redwood board material resists moisture and insect damage.
- Private Black galvanized steel posts and aluminum rails border the spaced Redwood rows.
- Modern Yard™ 114-inch Steel Post x 0.5 PC (cut in half)
- Modern Yard™ Accessory – 1-Inch Spacer for Horizontal Fence (40-Pack) x 0.2 pack (1-inch Groove Cover x 8 PCs, 1-inch Composite Spacer x 8 PCs)
- Modern Yard™ Redwood Fence Board x 1.25 packs (5 boards)
- Modern Yard™ Horizontal Fence Rail Set x 1 set
- Modern Yard™ Accessory – Standard Post Cap x 1 PC (extra per 114-inch stock post cut into two)
Limited warranty periods (residential / commercial use):
- Structural defects in Redwood boards and covered metal fence parts: up to 25 / 10 years.
- Covered Redwood board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
What makes this fence semi privacy?
Four openings separate the five horizontal Redwood boards. Each board-to-board gap is 1 inch. The ½-inch clearance below the bottom rail is a separate engineering dimension. Semi privacy describes the open infill pattern; the nominal 3 ft height identifies this low fence configuration.
Are extra rails used to make each gap?
No. One top rail and one bottom rail enclose the entire board stack. Eight aluminum spacers set the four board gaps, with two spacers in each gap. Eight 1-inch groove covers fill the side post slots at the same four levels.
Do Redwood board packs contain complete fence kits?
Each Redwood pack supplies four boards, so one isolated five-board section needs two packs and leaves three boards spare. Rails, spacers and posts are separate products. For two free-standing supports, cut one 114-inch stock post into two and add one extra cap. In a continuous run, count each shared post once and combine board demand before rounding packs.
You Might Also Like
In-Ground
Style #: WPH/G10RD8-72X60-IG
In-Ground
Style #: WPH/G10RD10-72X72-IG
In-Ground
Style #: WPH/FPRD6-72X36-IG
In-Ground
Style #: WPH/DP16P01RD5DP1-72X42-IG
In-Ground
Style #: WPH/SPRD4-72X42-IG
In-Ground
Style #: WPV/STRD16LNPB2-96X48-IG