Redwood board faces and a Private Black P01 pattern define this horizontal composite fence. Five boards and one decorative steel module fill the nominal 6 × 3.5 ft section.
The Redwood boards blend wood fibers and recycled plastic in a wood plastic composite core. Galvanized steel posts and aluminum rails frame the In-Ground assembly. See the horizontal composite fence overview for the surrounding system.
Redwood board faces and a Private Black P01 pattern define this horizontal composite fence. Five boards and one decorative steel module fill the nominal 6 × 3.5 ft section.
The Redwood boards blend wood fibers and recycled plastic in a wood plastic composite core. Galvanized steel posts and aluminum rails frame the In-Ground assembly. See the horizontal composite fence overview for the surrounding system.
Engineering Dimensions
Nominal size (width × height): 6 × 3.5 ft.
Mounting Type: In-Ground.
Fence height: 43 inches.
Gap below the fence: ½ inch.
Post spacing (center to center): 71½ inches.
Clear opening between posts: approximately 68¼ inches.
Post height above ground: 45 inches, excluding the post cap.
Post depth below ground: 11 inches.
Concrete footing width: 12 inches min.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
114-inch Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
Top Rail: powder-coated aluminum.
Bottom Rail: powder-coated aluminum.
Horizontal Connector: aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
Composite Fence Board: wood-plastic composite (WPC).
Groove Cover: powder-coated aluminum.
Decorative Panel: electrocoated and powder-coated galvanized steel.
Decorative Panel Top Rail: powder-coated aluminum.
Decorative Panel Bottom Rail: powder-coated aluminum.
Decorative Panel Side Rail: powder-coated aluminum.
- Five Redwood boards sit alongside one P01 decorative module.
- Redwood wood grain contrasts with the Private Black steel pattern.
- The composite boards resist moisture, fading and decay.
- In-Ground steel posts support the matched aluminum rails.
- Modern Yard™ 114-inch Steel Post x 0.5 PC (cut in half)
- Modern Yard™ Redwood Fence Board x 1.25 packs (5 boards)
- Modern Yard™ 1 Foot x 6 Feet Fence Decorative Panel x 1 set
- Modern Yard™ Horizontal Fence Rail Set x 1 set
- Modern Yard™ Accessory – Standard Post Cap x 1 PC (extra per 114-inch stock post cut into two)
Limited warranty periods (residential / commercial use):
- Structural defects in Redwood boards and covered metal fence parts: up to 25 / 10 years.
- Covered Redwood board color changes: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently Asked Questions
Does Redwood name the decorative steel finish?
Redwood identifies the composite board color. The P01 steel panel has a Private Black finish.
Do the decorative rails replace the board rails?
Panel rails belong to the P01 kit. The five Redwood boards require the separate Horizontal Fence Rail Set.
Is the finished height exactly 3.5 ft?
The nominal height is 3.5 ft; the drawing specifies a 43-inch finished fence height.
You Might Also Like
In-Ground
Style #: WPH/DP16P01RD10DP1-72X72-IG
In-Ground
Style #: WPH/DP16P01RD12DP1-72X84-IG
In-Ground
Style #: WPH/FPRD7-72X42-IG
In-Ground
Style #: WPH/SPRD4-72X42-IG
In-Ground
Style #: WPH/G10RD5-72X36-IG
In-Ground
Style #: WPV/STRD16LNPB2-96X48-IG
























