top of page

Get a better sense of your project cost and materials.

modern-yard-logo-horizontal-black.webp

Redwood Composite Vertical 1 × 6 ft Decorative Panel, Pattern P01 Single Gate — 3.5 ft W × 6 ft H - In-Ground

Style #:

WPV/SGDP16P01RD4DP1-42X72-IG

Redwood wood-grain boards and a P01 steel panel create this vertical composite fence gate. Four upright composite pieces fill the board portion of the nominal 3.5 × 6 ft leaf, alongside the patterned insert.

The Redwood boards combine wood fibers and recycled plastic. Their surfaces resist moisture, insects, rot and fading without routine painting, staining or sealing. Aluminum rails support the separate decorative steel panel, and a Private Black welded aluminum frame surrounds the full infill.

One four-board pack supplies this gate's original Redwood boards. Order the P01 decorative kit, large frame, two 114-inch steel posts and stainless steel mechanical combination lock separately. Assemble the selected infill on site.

Use the composite gate collection to compare other board directions. When planning composite fence systems with this gate, list each fixed fence panel separately and check the shared support locations.

  • Redwood wood-grain boards and a P01 steel panel create this vertical composite fence gate. Four upright composite pieces fill the board portion of the nominal 3.5 × 6 ft leaf, alongside the patterned insert.

    The Redwood boards combine wood fibers and recycled plastic. Their surfaces resist moisture, insects, rot and fading without routine painting, staining or sealing. Aluminum rails support the separate decorative steel panel, and a Private Black welded aluminum frame surrounds the full infill.

    One four-board pack supplies this gate's original Redwood boards. Order the P01 decorative kit, large frame, two 114-inch steel posts and stainless steel mechanical combination lock separately. Assemble the selected infill on site.

    Use the composite gate collection to compare other board directions. When planning composite fence systems with this gate, list each fixed fence panel separately and check the shared support locations.

  • Engineering Dimensions

    Nominal size (width × height): 3.5 × 6 ft.

    Mounting Type: In-Ground.

    Gate height: 72 inches.

    Gap below the gate: 1 inch.

    Post spacing (center to center): 45½ inches.

    Clear opening between posts: approximately 42⅜ inches.

    Post height above ground: 74 inches, excluding the post cap.

    Post depth below ground: 40 inches.

    Concrete footing width: 12 inches min.

    Hinge positions: 8 / 28½ / 8 inches.

    Parts and Materials

    Standard Post Cap: powder-coated aluminum.

    114-inch Steel Post: powder-coated galvanized steel.

    3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).

    71 x 42-inch Welded Gate Frame: powder-coated aluminum.

    Gate Frame Cover Strip: powder-coated aluminum.

    #8 x 3/4" ST Screw: 410 stainless steel.

    #8 x 1-1/4" ST Screw: 410 stainless steel.

    #10 x 1" ST Screw: 410 stainless steel.

    Composite Fence Board: wood-plastic composite (WPC).

    Gate Stopper: powder-coated aluminum.

    Gate Stop Cover Plate: powder-coated aluminum.

    Hinge: powder-coated aluminum.

    Groove Cover: powder-coated aluminum.

    Mechanical Combination Lock: 304 stainless steel.

    Decorative Panel: electrocoated and powder-coated galvanized steel.

    Decorative Panel Top Rail: powder-coated aluminum.

    Decorative Panel Bottom Rail: powder-coated aluminum.

    Decorative Panel Side Rail: powder-coated aluminum.

    • Four upright Redwood boards accompany one patterned P01 steel insert.
    • The wood-fiber and recycled-plastic infill provides a wood-grain appearance.
    • Separate aluminum decorative rails and a welded gate frame surround the infill.
    • Redwood faces need no regular painting, staining or sealing.
  • Limited warranty periods (residential / commercial use):

    • Structural defects in Redwood boards and covered metal gate parts: up to 25 / 10 years.
    • Covered Redwood board color changes: up to 25 / 10 years.
    • Coastal metal coating defects: up to 5 / 3 years.
    • Non-coastal metal coating defects: up to 15 / 10 years.
    • Covered metal finish fading, all locations: up to 8 / 5 years.

    For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.

    Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes. The combination lock is outside the periods listed above. Contact Modern Yard for the applicable separate warranty terms.

    Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.

    Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.

    For approved claims, Modern Yard refunds or replaces defective boards or parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.

    Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.

    We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.

    Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.

Related Components

Modern Yard 114-inch galvanized steel fence post with compatible fence system components

Modern Yard™ 114-Inches Steel Post

Modern Yard Redwood composite fence board with wood-look finish on a white background

Modern Yard™ Redwood Fence Board (4-Pack)

Modern Yard 71 x 42 aluminum gate frame on a white background

Modern Yard™ 71 Inches x 42 Inches Gate Frame

Modern Yard 304 stainless steel mechanical combination gate lock

Modern Yard™ Stainless Steel Mechanical Combination Lock

Modern Yard 1 x 6 ft decorative fence panel with modern perforated metal design

Modern Yard™ 1 Foot x 6 Feet Fence Decorative Panel

Imagine Your Future Fence

​Installation Guides

Installation Manual

​Technical Drawing


Frequently asked questions

Buy the board product separately. One four-board pack supplies the four originals for this vertical leaf. The frame and P01 source kit are separate product groups in Component Needs.

Both use the P01 pattern, but their board direction and stock requirements differ. This upright version needs four Redwood pieces. The horizontal decorative single gate uses nine, so retain the cutting plan for the selected layout.

The single leaf requires a support on each side. Use the two specified 114-inch posts, with 74 inches above ground and 40 inches below. Count a shared fence-and-gate support once after checking the layout, while keeping the required gate post at that connection.

bottom of page