Open horizontal infill gives this small LINE gate its semi-privacy pattern at a front-yard entrance. The nominal 3.5 × 3.5 ft single gate has a Private Black powder-coated aluminum leaf, supplied preassembled with its infill already in place.
The welded leaf continues the horizontal appearance of the coordinating LINE fence, with In-Ground steel posts providing the supports. Its lower format and visible spaces between rows distinguish it from the taller closed models. Explore the metal gate options for other single- and double-leaf configurations.
Open horizontal infill gives this small LINE gate its semi-privacy pattern at a front-yard entrance. The nominal 3.5 × 3.5 ft single gate has a Private Black powder-coated aluminum leaf, supplied preassembled with its infill already in place.
The welded leaf continues the horizontal appearance of the coordinating LINE fence, with In-Ground steel posts providing the supports. Its lower format and visible spaces between rows distinguish it from the taller closed models. Explore the metal gate options for other single- and double-leaf configurations.
Engineering Dimensions
Nominal size (width × height): 3.5 × 3.5 ft.
Mounting Type: In-Ground.
Gate height above ground, including the bottom gap: 43¼ inches.
Gap below the gate: 1½ inches.
Post spacing (center to center): 45⅝ inches.
Clear opening between posts: approximately 42⅜ inches.
Post height above ground: 45 inches, excluding the post cap.
Post depth below ground: 24 inches.
Concrete footing width: 12 inches min.
Hinge positions: 8 / 8 inches.
Parts and Materials
Standard Post Cap: powder-coated aluminum.
Steel Post: powder-coated galvanized steel.
3/4" U-Channel Rubber Strip: PVC (polyvinyl chloride).
42 x 42-inch Pre-Assembled Semi-Privacy Gate: powder-coated aluminum.
#8 x 3/4" ST Screw: 410 stainless steel.
#10 x 1" ST Screw: 410 stainless steel.
Gate Stopper: powder-coated aluminum.
Gate Stop Cover Plate: powder-coated aluminum.
Hinge: powder-coated aluminum.
Groove Cover: powder-coated aluminum.
- One complete gate leaf: the welded aluminum unit arrives with its infill installed.
- Partial privacy: open spaces between the horizontal slats allow views through the gate.
- Private Black finish: this LINE model uses a powder-coated aluminum leaf.
- Front yard entrance: the nominal 3.5 ft gate height suits a lower entrance beside the front fence.
Limited warranty periods (residential / commercial use):
- Structural defects in covered metal gate parts: up to 25 / 10 years.
- Coastal metal coating defects: up to 5 / 3 years.
- Non-coastal metal coating defects: up to 15 / 10 years.
- Covered metal finish fading, all locations: up to 8 / 5 years.
For metal coating coverage, use the nearest shoreline of an ocean, sea or saltwater bay. Salt or brackish tidal estuaries also count. Measure in a straight line from the installed part. A distance of 10 miles or less is coastal; farther away is non-coastal.
Qualifying defects under normal use must meet the written terms, including color and coating claim conditions. Metal coverage applies only to covered parts and eligible factory finishes.
Normal airborne coastal salt and salt spray alone do not exclude qualifying coating claims. The metal warranty excludes direct saltwater immersion or splash damage.
Remaining coverage transfers with property ownership. Products must stay at the original site. Keep records of the products and original purchase date. Transfer or replacement does not restart coverage.
For approved claims, Modern Yard refunds or replaces defective parts. The original net purchase price determines the amount. The amount drops over time under the warranty schedule.
Metal coating compensation is 100% in the term’s first half, 50% in the second. Other claims follow separate schedules.
We do not pay for labor, installation, removal, reinstallation, freight or shipping. This changes if required by law or if Modern Yard expressly agrees in writing.
Email service@mymodernyard.com with purchase records, photos, product details and the issue. Expect a decision or next steps within 7–14 business days. Contact Modern Yard for full warranty terms.
Frequently asked questions
Does this small gate provide full privacy?
No. The horizontal slats have open spacing, so this semi-privacy gate allows views through the infill. It coordinates with LINE horizontal metal fencing in Private Black.
Do I need a separate gate frame or infill?
No. The gate kit includes the assembled leaf, infill and hinges.
How can I request a quote?
You Might Also Like
In-Ground
Without Crossbeam
Style #: LNH/SGFPPB-42X72-IG
In-Ground
With Crossbeam
Style #: LNH/SGFPPB-42X72-CB-IG
In-Ground
Without Crossbeam
Style #: LNH/DGFPPB-84X72-IG
In-Ground
With Crossbeam
Style #: LNH/DGFPPB-84X72-CB-IG
In-Ground
Without Crossbeam
Style #: FGV/SGFPPB4-42X72-IG
In-Ground
With Crossbeam
Style #: FGV/SGFPPB4-42X72-CB-IG


























